Instruction manual

- 1.8 -
Capping station
The capping station consists of ink caps, wipers for cleaning the heads, etc.
Cap : It covers the nozzle so as to prevent the head nozzle from drying up.
Wiper : It is used to clean the head nozzle.
The wipers are consumable parts. If the wiper is deformed or the work is stained,
replace the wiper with a new one. (
page 5.9)
The wiper cleaner takes off the discharged ink remains on of the wiper to keep affection
of the discharge liquid to the head, at a minimum. Clean the wiper cleaner regularly.
(
page 3.6)
Wiper
Ink Cap
Flushing Tray
Wiper cleaner