Instruction manual

- 1.6 -
Operation Panel
The operation panel that is used to operate the machine.
POWER lamp
It lights up (in green) when the
power to the machine is turned on.
Z key
Adjust the head (Y bar) height.
( page 2.7)
[VIEW] key
Used to attach and detach the work.
The carriage retracts and the table
moves forward. ( page 2.8)
[DATA CLEAR] key
Erase the data has been received.
( page 2.19)
[REMOTE] key
Change the operation mode between
the REMOTE mode and the LOCAL
mode. ( page 1.14)
[ENTER] key
Used to move to the lower-level menu
and establish the settings.
XY keys
[ ] [ ] [ ] [ ]
They are used to shift the
carriage and the medium un-
der the LOCAL mode. In ad-
dition they are used to se-
lect a set value.
( page 1.7)
[CYCLE START] key
Perform copy printing.
[TEST] key
Plots the test pattern for
checking Nozzle cogging.
( page 2.13)
[CLEANING] key
Performs head cleaning when ink
clogging occurs. ( page 2.13)
XY
Z
CYCLE START
VIEW
Display
Displays a set item, a guidance error, etc.
[FUNCTION] key
Enter to the setting function
menu. ( page 4.2)
[END] key
Used to cancel the last set item
that has been input or to return
to the previous setting menu.