Instruction manual

- 1.4 -
Configuration and function
The Front
1
2
3
4
5
6
7
8
9
10
11
3
Name Function
1 Pilot lamp Displays the plotter status as ACTIVE (green), or ERROR (red).
2 Station Cover A cover for the station maintenance. Open the cover when performing
the station maintenance.
3 EMERGENCY Switch (Emergency) Stop printing.
4 Parallel connector Bi-directional parallel interface connector. (complies with IEEE1284)
5 IEEE1394 connector A 400 M bps interface connector compatible with -IEEE1394.
6 AC inlet The power cable is connected to the AC inlet.
7 Power switch It turns on/off the power to the machine.
8 Operation panel This panel has the operation keys required for operating the machine
and the LCD for displaying set items, etc. ( page 1.6)
9Waste ink tank Waste ink gathers in this tank. ( page 3.14)
10 Table frame It supports the main unit. It is provided with casters and level foots for
moving the machine.
11 Table Moves back and forth when performing printing.