Instruction manual

- 1.3 -
Moving the machine
This section explains to carry the machine to e.g., an instruction location after assembled.
Raise the level feet of the table frame before moving the machine to a new location.
• Be sure to disconnect the power cable and the interface cable before
moving the machine.
• When moving the machine, take care not to apply excessive shock to
it.
•Be sure to adjust the level feet to level the machine at the new loca-
tion.
Method of moving the machine
When moving the machine, it must be held up
by at least eight persons as illustrated at right.
Locking the caster
Raise the level feet of the table frame before
moving the machine to a new location.
Lower and adjust the level feet to level the
machine at the new location.
• Use a level gauge to ensure that the table is
level in the front and in the back.