Instruction manual

- 5.18 -
Specifying the print head line [Use Head]
Use this function if nozzle missing cannot be recovered even after repetitive cleaning or if plotting
with higher quality is required. Divide the 16 (4x4) nozzles in the carriage into four horizontal rows
to specify the print headline.
The headline 3.4 is the discharge liquid head. You cannot specify it.
STEPS:
1. Press the [
] or [ ] keys to select [Use Head].
2. Press the [ENTER] key.
3. Press the XY [
] or [ ] keys to select the use
head.
4. Press the [ENTER] key.
5. Press the [END] key twice, and the menu re-
turns to the LOCAL mode.
MAINTENANCE
Use Head < ent >
Use Head
Head Line :L1234
<< LOCAL >>
X =1010 Y = 1860
Head Line 1
Head Line 2
Head Line 3
Head Line 4
MAINTENANCE
Use Head < ent >
Use Head
Head Line :L1234
Head Line :L1–3–
Head Line :L–2–4