Operator's Manual
3
•
•
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
-
tacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
•
SERVICE
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorised service providers.
Do not use a battery pack or tool that is dam-
may exhibit unpredictable behavior resulting in
explosion or risk of injury.
Follow all charging instructions and do not
charge the battery pack or tool outside the
Charging improperly or at temperatures outside the
SPECIFIC SAFETY RULES FOR
IMPACT WRENCHES
•
•
• Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting
a “live” wire may make exposed metal parts of the
power tool “live” and could give the operator an electric
shock.
•
•
•
Wear ear protectors when impact drilling. Expo-
sure to noise can cause hearing loss.
-
cally designed for use on impact wrenches and
drivers. Other sockets and accessories might shatter
or break causing injury.
•
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
lead from lead-based paint
crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
SPECIFICATIONS
Cat. No. ................................. M18 ONEFHIWF12E
Volts ............................................................ 18V DC
Battery Type .................................................M18™
Charger Type ................................................M18™
Anvil Type ....................Extended 1/2" Square-Ring
RPM ............................................................. 0-1800
Recommended Ambient
IPM .............................................................. 0-2400
Operating Temperature .................... -17°C to 51°C
FUNCTIONAL DESCRIPTION
6. Trigger
1. 1/2" Extended
square drive anvil
with friction ring
2. Control switch
3. Handle
4. LED
5.4-Mode drive control
1
2
3
4
5
6
batteries/rechargeable
Do not dispose electric tools,
batteries
together with household waste material.
Electric tools and batteries that have
reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling
facility. Check with your local authority
or retailer for recycling advice and
collection point.
Regulatory Compliance mark (RCM).
This product meets applicable
regulatory requirements.
Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or
temperature above 130°C (265°F) may cause
explosion.
Always use common sense and be cautious
when using tools. It is not possible to anticipate
every situation that could result in a dangerous
outcome. Do not use this tool if you do not
understand these operating instructions or you feel
the work is beyond your capability; contact
MILWAUKEE
®
Tool or a trained professional for
additional information or training.
Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE
®
service facility for a
replacement.
To reduce the risk of fire,
ADDITIONAL BATTERY SAFETY RULES
WAR
NIN G
personal injury , and product damage due to a
short circuit, never immerse your tool, battery
pack or charger in fluid or allow a fluid to flow
inside them. Corrosive or conductive fluids,
such as seawater , certain industrial chemicals,
and bleach or bleach-containing products, etc.,
can cause a short circuit.
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Impacts per Minute Under Load (IPM)
Read Operator's Manual