User Manual

ManualsBrandsMilton Industries ManualsCarPiggyBack Filter-Regulators 1142, 1142-1 - Form 8X925

WHAT ARE F.R.L.’s?

HOW THEY WORK

WHERE TO USE THEM

THE QUALITY NAME

FORM NO. 8X925

PIGGYBACK FILTER-REGULATOR

7-07

Page 1

For Miniature Filter / Regulator

Piggyback

Bowl Type Max. Inlet Pressure Temperature Range

Polycarbonate 150 PSI 40¡ F to 125¡ F

For Filter / Regulator

Piggyback

Bowl Type Max. Inlet Pressure Temperature Range

Polycarbonate 150 PSI 40¡ F to 125¡ F

Metal 200 PSI 40¡ F to 160¡ F

w/Auto Drain 30 TO 175 PSI 40¡ F to 120¡ F

INSTRUCTION SHEET

Summary of content (4 pages)

PAGE 1
INSTRUCTION SHEET For Filter / Regulator Piggyback WHAT ARE F.R.L.’s? Bowl Type Max. Inlet Pressure Temperature Range Polycarbonate 150 PSI 40¡ F to 125¡ F Metal 200 PSI 40¡ F to 160¡ F w/Auto Drain 30 TO 175 PSI 40¡ F to 120¡ F For Miniature Filter / Regulator Piggyback Bowl Type Max. Inlet Pressure Temperature Range Polycarbonate 150 PSI 40¡ F to 125¡ F HOW THEY WORK WHERE TO USE THEM THE QUALITY NAME FORM NO.
PAGE 2
MICRO-FILTERS Although the Micro-Filter is the simplest of the three basic air control devices, it is also the least understood and the one most frequently installed improperly. Read on. Although you may think a big filter is more effective, the reverse may actually be true if too little air passes through. Always select filter size based on your air flow or SCFM requirements.
PAGE 3
This is sufficiently dry for practically any purpose, including spray painting. However, this drying efficiency comes with a price. The desiccant that absorbs the water vapor eventually becomes saturated with water and can no longer absorb anymore. Fortunately, you are alerted to this by a change in desiccant color - from bluish-white to pink. It achieves this exceptional filtration through a white borosilicate element that can be replaced when necessary.
PAGE 4
CHEMICALS NOT TO BE USED WITH POLY BOWLS FILTERS REGULATORS LUBRICATORS The basic air control device for all systems. Removes solid particulate matter and water condensate. Available in a wide variety of sizes. A full line of regulators in both standard pressure (2125 psi) and high pressure (10-250 psi). All metal construction. Precision lubricators to automatically provide essential oil to all your pneumatic tools. Can be adjusted to deliver the correct amount.