User Manual

ManualsBrandsMilton CAT ManualsHoistTH407

Cat

TH407

Telehandler

Speciﬁcations

Engine

Engine Model (Standard) Cat

C4.4 Mechanical DITAAC

Engine Model (Optional) Cat

C4.4 Electronic DITAAC-ACERT

™

Gross Power (Standard) 74.5 kW 100 hp

Gross Power (Optional) 93.1 kW 125 hp

Maximum Torque (Standard) 410 Nm at 1400 rpm

Maximum Torque (Optional) 496 Nm at 1400 rpm

Bore 105 mm 4.13 in

Stroke 127 mm 4.99 in

Displacement 4.4 L 268.5 in

Weights

Operating Weight 7700 kg 16,980 lb

Operating Speciﬁcations

Rated Load Capacity 3700 kg 8,150 lb

Maximum Lift Height 7.30 m 24 ft

Maximum Forward Reach 3.76 m 12 ft 3 in

Top Travel Speed 40 kph 25 mph

Capacity at Max Height 1800 kg 4,000 lb

Capacity at Max Reach 1500 kg 3,300 lb

Turning Radius over Tires 3.75 m 12 ft 4 in

Service Reﬁll Capacities

Fuel Tank 150 L 39.63 gal

Hydraulic Tank 90 L 23.78 gal

Tires

Standard 15.5/80-24 16PR

Optional 400/80 R24 Power CL

440/80 R24 Power CL

460/70 R24 XMCL

500/70 R24 XMCL

15.50 x 25 SGL

Brakes

• Service brakes are inboard wet disc brakes on front axle

• Parking brakes are mechanical on front axle

Hydraulic System

Maximum System Pressure 250 bar 3,625 psi

Maximum Pump Flow 150 L /min 39.63 gal/min

Pump Type Variable displacement

load sensing axial piston pump

Auxiliary Hydraulic Supply 80 L/min 21.13 gal/min

(Intermittent)

Auxiliary Hydraulic Supply 60 L/min 15.85 gal/min

(Continuous)

• Auxiliary Hydraulic Circuit used for all attachments

equipped with cylinders or other hydraulic components.

Consists of valves, controls, and hydraulic lines.

Transmission Speeds

Forward — 1 7 kph 4.3 mph

Forward — 2 12 kph 7.45 mph

Forward — 3 21 kph 13 mph

Forward — 4 32 kph 19.8 mph

Forward — 5 40 kph 25 mph

Reverse — 1 7 kph 4.3 mph

Reverse — 2 12 kph 7.45 mph

Reverse — 3 21 kph 13 mph

Boom Performance

Boom Up 7.5 Seconds

Boom Down 5.1 Seconds

Tele In 4.8 Seconds

Tele Out 5.7 Seconds

Tilt Forward (dump) 3 Seconds

Tilt Backward 3 Seconds

Combined — Up and Out 11.5 Seconds

Combined — Down and In 6.6 Seconds

Drawbar Pull 83.4 kW 8500 kg 18,740 lb

Drawbar Pull 87.3 kW 8900 kg 19,620 lb

Instruments

• Engine speed, boom angle, machine speed, operation hours,

% of continuous ﬂow selected, gear selected and direction

Summary of content (2 pages)

PAGE 1
Cat ® TH407 Telehandler Specifications Engine Engine Model (Standard) Engine Model (Optional) Gross Power (Standard) Gross Power (Optional) Maximum Torque (Standard) Maximum Torque (Optional) Bore Stroke Displacement Hydraulic System Cat C4.4 Mechanical DITAAC Cat ® C4.4 Electronic DITAAC-ACERT ™ 74.5 kW 100 hp 93.1 kW 125 hp 410 Nm at 1400 rpm 496 Nm at 1400 rpm 105 mm 4.13 in 127 mm 4.99 in 4.4 L 268.5 in3 Maximum System Pressure 250 bar 3,625 psi Maximum Pump Flow 150 L /min 39.
PAGE 2
TH407 Telehandler Dimensions All dimensions are approximate. 2385 mm (93.89 in) 1838 mm (72.36 in) 409 mm 16.10 in 3050 mm(120.07 in) 4679 mm(184.21 in) 2400 mm(94.48 in) 5153 mm(202.87 in) Load Chart and Dimensions 8.5 m (28 ft) IMPORTANT 50° 40° 4.9 m (16 ft) 1.2 m (4 ft) 20° 10° ) 2000 kg (4,400 lb) 2500 kg (5,500 lb) 3000 kg (6,600 lb) 3700 kg (8,150 lb) 2.4 m (8 ft) DO NOT tip the machine forward to determine the allowable load. 3.7 m (12 ft) 30° 1500 kg (3,300 lb 3.