PM-201 Cold Planer Cat® C18 Engine with ACERT® Technology Gross Power 485 kW Rotor Width 2100 mm Rotor Depth (maximum) 305 mm 650 hp 83" 12" Operating Weight with conical rotor with breakaway rotor 39 165 kg 38 145 kg 86,360 lb 84,105 lb with weld-on rotor 38 050 kg 83,905 lb
PM-201 Cold Planer The new PM-201 combines enhanced production capabilities, optimized performance and simplified service to complete tough milling applications with productive results. C18 Engine with ACERT® Technology ACERT® Technology works at the point of combustion to optimize engine performance and provide low exhaust emissions. The C18 engine with ACERT® Technology provides clean burning power.
Rotor Options With a choice of three rotor options, the PM-201 can be configured for different applications and production requirements. Page 6 Operator’s Station Ergonomic design emphasizes comfort, visibility and easy operation. Left and right side machine controls are grouped and conveniently located to enhance operator visibility, productivity and reduce fatigue.
C18 Engine with ACERT® Technology A combination of innovations working at the point of combustion, ACERT® Technology optimizes engine performance while meeting U.S. EPA Tier 3 and European EU Stage IIIa emission regulations for off-road applications. Turbocharged and Air-to-Air Aftercooling (ATAAC) High horsepower with increased response time is assured while keeping exhaust temperatures low for long hours of continuous operation.
Propel System Hydrostatic drive with hydraulic flow provided by a variable displacement piston-type pump. Drive motors on each track provides balanced tractive effort. Propel pump provides balanced flow to the dual displacement drive motors on each track. Provides superior tractive effort on all surfaces. Load sensing system controlled by the ECM, matches propel speed to load on engine for maximum production.
Rotor Selection Choice of three rotor designs for different applications and production requirements. Tools are mounted in drive-in, knock-out holders for quick and easy replacement. Conical Tool Holder Rotor 190 point-attack carbide-tipped tools are mounted in durable three-piece, patented quick release tool holders and arranged in a triple-wrap configuration for maximum breakout force. Quick release conical tool holder features a tapered fit maintaining tightness in holder base.
Primary Collecting Conveyor A large discharge opening and wide collecting conveyor belt clears out the cutter box fast for increased production. Water spray system provides lubrication and controls dust. Large discharge opening clears out the cutter box fast for increased production. 1 1020 mm (40") wide collecting conveyor is driven by two high torque hydraulic motors provides maximum efficiency.
Operator’s Station Designed for efficiency, productivity and simple operation from either side of the console. Easy to reach controls minimize operator fatigue. Dual operating controls including steering wheels, propel levers, upper conveyor, machine elevation and rear track steering functions. Computerized Monitoring System (CMS) constantly monitors system pressures and engine condition with six modes of operation. Alerts the operator if a problem does occur with three levels of warning.
Automatic Grade and Slope Control The optional contacting or non-contacting grade controls provide precise control of the machine to a preset cutting depth. System can be configured to control grade or cross slope. Contact or non-contact grade sensors can be positioned on each side are easy to position and provides a consistent accuracy to ± 3 mm (1/8"). Cross slope sensor adds to system versatility.
Reliability and Serviceability Reliability and serviceability are integrated into every Caterpillar machine. These important features keep your machine investment profitable. Hydraulic rotor service door opens wide for convenient access to rotor for inspection and tool maintenance. Engine mounted air compressor and cutting bit removal tools makes changing cutting tools quick and easy. Chrome leg cylinders slide through leg barrel equipped with a lip seal and a replaceable nylon sleeve-type bearing.
Engine Propel System Rotor Drive System The Caterpillar® C18 engine with ACERT® Technology is a six cylinder, turbocharged air-to-air after-cooled diesel engine. The engine meets U.S. EPA Tier 3 and European EU Stage IIIa engine emission regulations. Hydrostatic drive with hydraulic flow provided by a variable displacement piston-type pump. Drive motors with planetary gear reduction on each track provides balanced tractive effort.
Steering Dimensions Hydraulic power-assist steering with two steering wheels on operator’s console. Four steering modes with automatic realignment of rear tracks through ECM is standard. Operating Features n n Double-acting steering cylinders control the front and rear tracks and are powered by a pressurecompensated, piston-type pump. Constant pressure is assured in the steering system. Switch on operator’s console provides four steering modes.
Grade and Slope Control Machine elevation – rotor depth and cross slope controlled manually by operator is standard. Automatic rotor depth and slope control is optional and features electronic over hydraulic control. System can be configured with contacting or non-contacting grade sensors. Slope sensor adds versatility. Features n n n n n n n Machine elevation controls located on the operator’s console and at ground level allows rotor depth and cross slope to be controlled manually.
Optional Equipment Note: Some options listed may be an option in some areas and standard in others. Consult your dealer for specifics. Hydraulically Operated Front Door provides an adjustable down pressure to prevent slabbing of the road surface in front of the machine resulting in optimum sizing and gradation. Hydraulically Operated Side Plates allow ground personnel to raise/lower side plates to precisely place the rotor against gutter pans or when working near obstructions.
PM-201 Specifications Operating Weights (with conical rotor) Machine on front tracks on rear tracks 39 165 kg 21 540 kg 17 625 kg 86,360 lb 47,500 lb 38,860 lb Shipping Weights (with conical rotor) Machine on front tracks on rear tracks 34 900 kg 18 845 kg 16 055 kg 76,950 lb 41,550 lb 35,400 lb Machine Dimensions (operating) Overall length (conveyor up) Overall machine width Maximum height Minimum height Maximum truck clearance Rotor ground clearance Conveyor swing Collecting conveyor width Upper con
Caterpillar offers a comprehensive line of profilers. The PM-102 and PM-200 are designed to have the best productivity, reliability, versatility, visibility and ease of operation in their class. Contact your local Caterpillar dealer to learn more about the complete line of Caterpillar Paving Products. PM-102 Operating Weight Gross Power (SAE J1995) Cutting Width Cutting Depth Propel Speeds Operating Travel Rotor Drive Clutch 17 600 kg 168 kW 1000 mm 305 mm 38,810 lb 225 hp 40" 12" 27 mpm 89 fpm 4.
