Owner's manual

18
IT62H Integrated Toolcarrier specifications
Transmission
Forward 1 7 km/h 4.3 mph
Forward 2 13 km/h 8.1 mph
Forward 3 22.6 km/h 14 mph
Forward 4 38 km/h 23.6 mph
Reverse 1 7.6 km/h 4.7 mph
Reverse 2 13.9 km/h 8.6 mph
Reverse 3 24.5 km/h 15.2 mph
Reverse 4 40 km/h 24.9 mph
• Maximum travel speeds (23.5-25 tires).
Hydraulic System
Bucket/Work Tool System – 270 L/min 71 gal/min
Pump Output
Steering System Pump Type Piston
Hydraulic Cycle Time – Raise 6 Seconds
Hydraulic Cycle Time – Dump 2.1 Seconds
Hydraulic Cycle Time – Lower, 2.6 Seconds
Empty, Float Down
Hydraulic Cycle Time – Total 10.7 Seconds
• Implement System (Standard), Piston Pump – Rated at
2,100 rpm and 1,000 psi (6900 kPa).
• Cycle time with rated payload
Brakes
Brakes Meets required standards.
• Meet OSHA, SAE J1473 OCT90 and ISO 3450-1985 standards.
Axles
Front Fixed front
Rear Oscillating +/- 13°
Maximum Single-Wheel 470 mm 18.5 in
Rise and Fall
Engine
Engine Model Cat
®
C7 ACERT™
Gross Power – SAE J1995 172 kW 230 hp
Net Power – ISO 9249 158 kW 211 hp
Net Power – SAE J1349 156 kW 209 hp
Net Power – 80/1269/EEC 158 kW 211 hp
Peak Torque (Net) @ 1,400 RPM 907 N·m 669 ft-lb
Bore 110 mm 4.33 in
Stroke 127 mm 5 in
Displacement 7.2 L 439 in
3
• EPA Tier 3, EU Stage III Compliant
• These ratings apply at 1,800 rpm when tested under the
specified standard conditions.
• Rating for net power advertised based on power available
when the engine is equipped with alternator, air cleaner,
muffler and on-demand hydraulic fan drive at maximum
fan speed.
Weights
Operating Weight 19 397 kg 42,770 lb
• For 3.25 m
3
(4.25 yd
3
) material handling bucket with BOCE
Buckets
Bucket Capacities 3.25-4.25 m
3
4.25-5.5 yd
3
Max Bucket Capacity 4.25 m
3
5.5 yd
3
Operating Specifications
Breakout Force 159 kN 35,775 lb
Static Tipping Load, Full Turn – 11 730 kg 25,865 lb
Bucket
Static Tipping Load, Full Turn – 8310 kg 18,324 lb
Forks
• For 3.25 m
3
(4.25 yd
3
) material handling bucket with BOCE
• For 1524 mm (60 in) forks