Owner's manual

STARTING CAPABILITIES (sKVA)
FUEL
Natural Gas Propane Vapor
Single-Phase 120/240VAC @1.0pf 60 Amps: 250 60 Amps: 250
Three-Phase 120/208VAC @0.8pf 60 Amps: 208 60 Amps: 208
Three-Phase 120/240VAC @0.8pf 60 Amps: 180 60 Amps: 180
Three-Phase 277/480VAC @0.8pf 60 Amps: 90 60 Amps: 90
Three-Phase 346/600VAC @0.8pf 60 Amps: 72 60 Amps: 72
sKVA vs. Voltage Dip
480VAC 208/240VAC
Alternator kW 10% 15% 20% 25% 30% 35% 10% 15% 20% 25% 30% 35%
Standard 60 42 63 83 104 125 146 32 47 62 78 94 110
Upsize 1 70 59 88 117 147 176 205 44 66 88 110 132 154
Upsize 2 100 79 118 157 197 236 275 59 89 118 148 177 206
Upsize 3* 130 116 174 232 290 348 406 87 131 174 218 261 305
*Brushless excitation only
COOLING
COMBUSTION AIR REQUIREMENTS
ENGINE
EXHAUST
STANDBY
Flow at Rated Power cfm 185
STANDBY
Rated Engine Speed rpm 1800
Horsepower at Rated kW*** hp 96
Piston Speed ft/min 1251
BMEP psi 101.8
*** Refer to “Emissions Data Sheet” for maximum bHP for EPA and SCAQMD permitting purposes.
STANDBY
Exhaust Flow (Rated Output) cfm (m
3
/min) 520 (14.7)
Maximum Recommended Back Pressure inHg 1.5
Exhaust Temp (Rated Output) ºF (ºC) 1050 (565.6)
Exhaust Outlet Size (Open Set) in 2.5"
POWER RATINGS (kW)
Fuel Consumption Rates**
Natural Gas Propane Vapor
Percent Load ft
3
/hr m
3
/hr Percent Load ft
3
/hr gal/hr m
3
/hr
25% 310 8.8 25% 128 3.5 3.6
50% 500 14.2 50% 207 5.7 5.9
75% 665 18.8 75% 275 7.6 7.8
100% 900 25.4 100% 373 10.3 10.6
** Refer to "Emissions Data Sheet" for maximum fuel flow for EPA and SCAQMD permitting purposes.
STANDBY
Air Flow (inlet air combustion and radiator) ft
3
/min (m
3
/min) 5785 (163.8)
System Coolant Capacity Gal (Liters) 6.3 (23.9)
Heat Rejection to Coolant BTU/hr 252,000
Max. Operating Air Temp on Radiator ºF (ºC) 122 (50)
Max. Ambient Temperature ºF (ºC) 104 (40)
Maximum Radiator Backpressure in H
2
O 1.50
3 of 5
G60LG operating data (60Hz)
G60LG 60kW
Deration – Operational characteristics consider maximum ambient conditions. Derate factors may apply under atypical site conditions. All performance ratings in accordance with ISO3046,
BS5514, ISO8528 and DIN6271 standards.