AP600D ® Asphalt Paver Cat® C6.6 Engine with ACERT™ Technology Gross Power (SAE J1995) at 2200 rpm 129.5 kW/176 hp Net Power (ISO 9249) at 2200 rpm 121.9 kW/165.8 hp Operating Weight with AS4251C Screed 18 200 kg Hopper Capacity Standard Paving Range AS4251C Screed Maximum Paving Width AS4251C Screed (Electric Heat) AS4251C Screed (LPG Heat) 6.5 m3 (14.
High Performance and Operator Comfort Make the AP600D the Perfect Choice The AP600D sets the standard in performance, operator comfort, ease of use, ride quality and reliability. C6.6 Engine with ACERT™ Technology Dual Operator’s Station Advisor Monitoring System ACERT Technology works at the point of combustion to optimize engine performance. ACERT Technology incorporates an electronic controller to precisely deliver multiple injections of fuel.
Versatility Defines the AP600D The AP600D excels in a wide range of applications from routine commercial jobs to demanding highway operations. Undercarriage Maneuverability Independent Material Handling System The wheel undercarriage utilizes four, front solid rubber steering tyres that are mounted on pairs of oscillating bogies for maximum ground contact and smooth operation. The front wheel assist and all-wheel assist options increase mobility in tough operating conditions. pg.
Cat® C6.6 Engine with ACERT Technology ACERT Technology manages combustion using a combination of air management, precise fuel delivery and careful timing in order to lower emissions and meet European EU Stage IIIA engine emissions requirements. Cat C6.6 Engine with ACERT Technology. The C6.6 engine provides a full-rated gross power (SAE J1995) of 129.5 kW (176 hp) at 2200 rpm. Meets European EU Stage IIIA engine emission requirements. Turbocharged and Air-To-Air Aftercooling (ATAAC).
Operator Comforts for a Productive Environment The dual operator’s station offers the best-in-class comfort, visibility and ease of use. Dual Operator’s Station. The ergonomic dual operator’s station incorporates a sliding control console, ground speed indicators, adjustable suspension seats, armrests and retractable seat belts. Operator Visibility. The dual swing-out operator’s station can be positioned in one of five different locations to provide optimum visibility.
Wheel Undercarriage System The wheel undercarriage system provides excellent mobility and maneuverability along with a smooth ride for optimum performance. Excellent Mobility. The sharp turning radius and high propel speeds allow the paver to move quickly around the job site. Three Propel Modes. Pave, travel and maneuver modes provide good control and versatility. The new maneuver mode provides a 1.4 m turning radius for excellent maneuverability in tight quarters. 1 Speed Control.
Independent Material Handling System Promotes Hands-Free Operation The material handling system promotes hands-free operation by providing features such as independent control of each auger and each conveyor. Precise Mix Delivery. The material delivery system provides precise mix delivery with minimal operator monitoring. The left and right conveyors in addition to the left and right augers are controlled independently. 2 Outboard-Mounted Conveyor Drives.
Optional Generator System Provides Quiet Power The high capacity generator provides power for the electric screed heat, auxiliary lights and job site tools. Industrial, Single-Phase A.C. Generator. The tractor-mounted generator provides 25 kW of power at 60 Hz for the electric screed heat and the auxiliary power panel. Circuit breaker protection, internal electronic voltage regulation and a dual bearing design provide reliability. Generator Choices Available (Belt or Hydraulic Driven).
Serviceability Features That You’ve Come to Expect Simplified service means more time spent paving and less time spent on maintenance. Advisor Monitoring System (AMS). The Advisor display lists diagnostic fault codes for machine functions making troubleshooting quick and easy. Manual Overrides. The hydraulic pump solenoids incorporate manual overrides to assist troubleshooting procedures. Large Access Doors and Panels.
Engine Transmission Steering Six cylinder Caterpillar C6.6 with ACERT Technology, turbocharged air-to-air after-cooled diesel engine. Meets European EU Stage IIIA engine emission regulations. The drive system utilizes two dual path hydrostatic pumps and two fixed displacement motors. The pumps are infinitely variable with electronic displacement controls (EDC) for steering and speed. Single speed motors drive two speed planetary gear boxes to provide two propel ranges.
Dimensions J F G H I K L A E B C D mm A Tractor length with push roller B Length with push roller and screed C Transport width with screed end gates (hopper raised) Transport width without screed end gates (hopper raised) D Tractor operating width (hopper lowered) E Track gauge width F Operating height with canopy G Transport height with canopy, fumes stack and seat lowered 4950 6160 2720 2500 3306 2200 3840 520 3200 1960 533 260 6.
AP600D Asphalt Paver For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Caterpillar dealer for available options.
