AP-1055D Asphalt Paver Cat® C7 Engine with ACERT® Technology 167 kW (224 hp) Gross Power (SAE J1995) Standard Paving Width 3.05 m (10') Hopper Capacity 6.1 m3 (13.2 tonne) 215 ft3 (14.
Productivity and Reliability in a Durable Package The AP-1055D Asphalt Paver with ACERT® Technology offers fuel efficiency, high performance, speed and job versatility to maximize productivity. ✔ C7 Engine with ACERT®Technology ACERT® Technology works at the point of combustion to optimize engine performance. ACERT® Technology incorporates an electronic controller to precisely deliver multiple injections of fuel.
Hydrostatic Drive System The hydrostatic drive system eliminates chains and other mechanical linkages between the diesel engine and final drive components. A closed-loop hydrostatic propel system incorporates pave, travel and maneuver modes for maximum efficiency and versatility. The speed control system maintains preset paving speeds throughout the job. The machine controller provides accurate control of the steering and propulsion systems, and ensures straight-line tracking.
Cat® C7 Engine with ACERT® Technology ACERT® Technology incorporates a series of innovations working at the point of combustion to optimize engine performance while meeting U. S. EPA Tier 3 and E. U. Stage IIIa engine emission regulations. Turbocharged and Air-To-Air Aftercooling (ATAAC) The turbocharged air-to-air aftercooling system provides high horsepower with increased response time while keeping exhaust temperatures low for long hours of continuous operation.
High Ambient Temperature Cooling System The standard, high-capacity cooling system provides efficient operation in high ambient temperatures. The new system design also provides quiet operation that benefits the operator and the surrounding environment. Airflow The airflow design draws ambient air across the engine compartment and through the radiator. This new design allows the exhaust air to exit the right side of the machine in order to provide a cooler engine compartment and operator platform.
Mobil-trac™ Undercarriage The Mobil-trac undercarriage provides superior durability while delivering unmatched mobility and traction. Mobil-trac™ Undercarriage The Mobil-trac undercarriage combines the flotation and traction benefits of a crawler suspension with the mobility and ride quality of a wheel-type paver. Durable Mobil-trac™ Belt The Mobil-trac system includes a durable, high strength rubber track belt with a thick outer cover and five internal layers of flexible steel cable.
Steel Track Undercarriage The steel track undercarriage provides even weight distribution, good tractive effort and dependable performance. Quad Rear Bogey A special quad bogey is positioned near the rear of the steel track in order to evenly distribute the load. The steel track system includes hydraulic cylinders to provide automatic tensioning. Bonded Track Pads Track Rails The steel track system incorporates D3 dozer track rails.
Exclusive Material Delivery System Productivity and quality enhancements are built-in features. The AP-1055D provides precise mix delivery with minimal operator monitoring through the most advanced material handling system. Left and right feeders in addition to the left and right augers are controlled independently. The ability to control these four components separately, through a machine controller, eliminates the need for feeder gates.
Gateless Feeders Variable speed feeders precisely control mix delivery while reducing wear and segregation. The gateless feeders on the AP-1055D always run full of mix regardless of the speed required to fill the auger chamber. This is typically a slower speed than would be experienced with a paver utilizing feeder gates to control mix delivery rates. By not always having to run at full speed, feeder component wear is significantly reduced.
Optional Generator System The high capacity, integrated generator ensures peak performance and high reliability. Industrial, Single-Phase Generator The 24 kW generator is hydraulically driven through a load-sensing, pressure-compensating pump providing quiet operation. Single Control Switch A single switch on the tractor’s operating console activates the generator. The generator operates at 1800 rpm and includes GFCI protection.
Electric Heat Screeds The AS-2301 and Extend-A-Mat® 10-20B screeds are available with an electric heating system. Thermal Image of Electric Heat Screed Plate at Target Temperatures Operator Friendly Environment The electric screed plate heating system eliminates the use of diesel fuel burners, creating a user friendly environment. Fast Warm-Up Time The electric screed provides a warm-up time in 30 minutes or less to 122° C (220° F) when ambient temperatures are at or above 22° C (40° F).
Serviceability Simplified service means more paving and less maintenance time. Electronic Monitoring System (EMS-III) EMS-III simplifies calibration of hydraulic and electrical systems and is compatible with CAT® Electronic Technician (CAT ET). Large Access Doors and Panels Preventative maintenance points can be accessed through the large swing open access doors and panels. Remote Lubrication Points Grease fittings are grouped to provide quick, routine service of bearings.
Engine Suspension Drive System The Caterpillar® C7 engine with ACERT® Technology is a six cylinder, turbocharged, diesel engine. The engine meets U.S. EPA Tier 3 and EU Stage IIIa engine emission regulations. The high-speed Mobil-trac™ undercarriage consists of a durable, high-strength rubber belt with a thick outer cover that includes five internal layers of flexible steel cable. The track is 3023 mm (119") long and 457 mm (18") wide.
Feeders and Augers Operator Stations Dual feeders and augers are controlled through variable speed hydrostatic drives and operate independently of forward speed. Right and left side feeders operate independently of each other. Feeder drive and drive chains are located outside the mainframe for easy accessibility.
Dimensions A B C D E F G H I J Tractor length w/push roller Length with push roller and screed Length with truck hitch and screed Transport width with end gates and 10-20B screed (hopper raised) Transport width with end gates and AS-2301 screed (hopper raised) Transport width without end gates and 10-20B screed(hopper raised) Transport width without end gates and AS-2301 (hopper raised) Tractor operating width (hopper lowered) Operating height with ventilation system Transport height with muffler, fumes s
Caterpillar offers a comprehensive line of Asphalt Pavers Contact your local Caterpillar® dealer to learn more about the complete line of Caterpillar® Paving Products. The AP-1000D Wheel Asphalt Paver The AP-800D Wheel Asphalt Paver Gross power (SAE J1995) 167 kW 224 hp Tractor weight* 14 741 kg 32,470 lb Standard paving width 3.05 m 10' * Tractor weight includes generator and auxiliary power panel. Gross power 97 kW 130 hp Tractor weight* 13 307 kg 29, 310 lb Standard paving width 2.
