Instruction Manual

24
993K Wheel Loader specifications
Operation/Bucket Specifications – High Lift
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers. SAE Standards
J732C govern loader ratings and are denoted in the text by
(§).
† Static tipping load and operating weight shown are based on standard machine configuration with a full fuel tank, coolant, lubricants
and operator.
†† Measured 102 mm (4.0"): behind tip of segments with bucket hinge pin as pivot point in accordance with SAE J732C.
Michelin Michelin Bridgestone 62 PR Bridgestone 62 PR
Bucket Type Rock Rock Rock Rock
Ground Engaging Tools Teeth & Segments Teeth & Segments Teeth & Segments Teeth & Segments
Cutting Edge Type Spade Spade Spade Spade
Bucket Part No. (Group Level) 303-3280 303-3290 303-3270 303-3310
Standard Standard Standard High
Rock Rock Rock Abrasion
Rock
Std. Hi-Lift Std. Hi-Lift Std. Hi-Lift Std. Hi-Lift
Rated capacity (§)m
3
14.0 14.0 14.5 14.5 13.0 13.0 13.0 13.0
yd
3
18.0 18.0 19.0 19.0 17.0 17.0 17.0 17.0
Struck capacity (§)m
3
11.0 11.0 12.0 12.0 10.0 10.0 10.0 10.0
yd
3
14.4 14.4 15.7 15.7 13.1 13.1 13.1 13.1
Heaped capacity (§)m
3
14.0 14.0 14.0 14.0 13.0 13.0 13.0 13.0
yd
3
18.3 18.3 18.3 18.3 17.0 17.0 17.0 17.0
Width (§) mm 5080 5080 5080 5080 5080 5080 5160 5160
ft 16.7 16.7 16.7 16.7 16.7 16.7 16.9 16.9
Dump clearance at full lift and
45° discharge (§) mm
4576 5221 4576 5221 4719 5364 4786 5431
ft 15.0 17.1 15.0 17.1 15.5 17.6 15.7 17.8
Reach at full lift and
45° discharge (§) mm
2600 2709 2600 2709 2503 2612 2507 2616
ft 8.5 8.9 8.5 8.9 8.2 8.6 8.2 8.6
Reach with lift arms horizontal
and bucket level mm
5060 5576 5060 5576 4922 5438 4878 5394
ft 16.6 18.3 16.6 18.3 16.1 17.8 16.0 17.7
Digging depth (§) mm 225 292 225 292 181 248 166 233
in 8.9 11.5 8.9 11.5 7.1 9.7 6.5 9.7
Overall length (§) mm 15 338 15 972 15 338 15 972 15 163 15 803 15 107 15 748
ft 50.3 52.4 50.3 52.4 49.7 51.8 49.6 51.7
Overall height with bucket
at full raise (§) mm
9810 10 454 9939 10 584 9854 10 498 9827 10 472
ft 32.2 34.3 32.6 34.7 32.3 34.4 32.2 34.4
Loader clearance circle with bucket
in carry position (§) mm
11 053 11 351 11 053 11 351 11 014 11 310 11 017 11 313
ft 36.3 37.2 36.3 37.2 36.1 37.1 36.1 37.1
Static tipping load straight † (§) kg 82 767 69 393 82 987 69 515 84 525 70 917 83 129 69 597
lb 182,502 153,012 182,986 153,281 186,378 156,372 183,300 153,460
Static tipping load at full
40° turn
†† (§)kg71 713 59 655 71 886 59,742 73 327 61,061 71,956 59 759
lb 158,126 131,540 158,510 131,731 161,687 134,639 158,663 131,769
Static tipping load at full
43° turn
†† (§) kg 70 074 58 211 70 240 58 293 71 667 59 599 70 299 58 301
lb 154,512 128,356 154,880 128,535 158,026 131,417 155,010 128,553
Breakout force †† (§) kN 667.2 666.5 666.1 665.4 714.3 713.3 730.3 729.3
lb 150,130 149,970 149,867 149,708 160,713 160,503 164,317 164,088
Operating weight † (§)kg133 328 134 294 133 503 134 469 133 637 134 603 134 620 135 586
lb 293,989 296,119 294,375 296,505 294,670 296,800 296,838 298,968