Instruction Manual

22
993K Wheel Loader specifications
Operation/Bucket Specifications – Standard Lift
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers. SAE Standards
J732C govern loader ratings and are denoted in the text by
(§).
† Static tipping load and operating weight shown are based on standard machine configuration with a full fuel tank, coolant, lubricants
and operator.
†† Measured 102 mm (4.0"): behind tip of segments with bucket hinge pin as pivot point in accordance with SAE J732C.
Bridgestone 2** Bridgestone 2** Bridgestone 2** Bridgestone 2**
Bucket Type Rock Rock Rock Rock
Ground Engaging Tools Teeth & Segments Teeth & Segments Teeth & Segments Teeth & Segments
Cutting Edge Type Spade Spade Spade Spade
Bucket Part No. (Group Level) 303-3270 303-3310 303-3260 303-3330
Standard High Standard High
Rock Abrasion Rock Abrasion
Rock Rock
Std. Hi-Lift Std. Hi-Lift Std. Hi-Lift Std. Hi-Lift
Rated capacity (§)m
3
13.0 13.0 13.0 13.0 12.0 12.0 12.0 12.0
yd
3
17.0 17.0 17.0 17.0 16.0 16.0 16.0 16.0
Struck capacity (§)m
3
10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0
yd
3
13.1 13.1 13.1 13.1 13.1 13.1 13.1 13.1
Heaped capacity (§)m
3
13.0 13.0 13.0 13.0 12.0 12.0 12.0 12.0
yd
3
17.0 17.0 17.0 17.0 16.0 16.0 16.0 16.0
Width (§) mm 5080 5080 5160 5160 5080 5080 5160 5160
ft 16.7 16.7 16.9 16.9 16.7 16.7 16.9 16.9
Dump clearance at full lift and
45° discharge (§) mm 4654 5299 4721 5366 4744 5389 4769 5414
ft 15.3 17.4 15.5 17.6 15.6 17.7 15.6 17.8
Reach at full lift and
45° discharge (§) mm 2503 2612 2507 2616 2413 2522 2459 2568
ft 8.2 8.6 8.2 8.6 7.9 8.3 8.1 8.4
Reach with lift arms horizontal
and bucket level mm 4922 5438 4878 5394 4794 5310 4810 5326
ft 16.1 17.8 16.0 17.7 15.7 17.4 15.8 17.5
Digging depth (§) mm 246 313 231 298 246 313 231 298
in 9.7 12.3 9.1 11.7 9.7 12.3 9.1 11.7
Overall length (§) mm 15 214 15 846 15 158 15 792 15 086 15 718 15 090 15 724
ft 49.9 52.0 49.7 51.8 49.5 51.6 49.5 51.6
Overall height with bucket
at full raise (§) mm 9789 10 433 9762 10 407 9680 10 325 9680 10 325
ft 32.1 34.2 32.0 34.1 31.8 33.9 31.8 33.9
Loader clearance circle with bucket
in carry position (§) mm 11 018 11 312 11 021 11 315 11 019 11 313 11 003 11 296
ft 36.1 37.1 36.2 37.1 36.2 37.1 36.1 37.1
Static tipping load straight † (§) kg 84 525 70 917 83 129 69 597 84 691 71 113 83 728 70 165
lb 186,378 156,372 183,300 153,460 186,743 156,803 184,620 154,714
Static tipping load at full
40° turn
†† (§) kg 73 327 61 061 71 956 59 759 73 509 61 269 72 542 60 318
lb 161,687 134,639 158,663 131,769 162,087 135,097 159,956 133,002
Static tipping load at full
43° turn
†† (§) kg 71 667 59 599 70 299 58 301 71 851 59 809 70 884 58 858
lb 158,026 131,417 155,010 128,553 158,431 131,879 156,299 129,782
Breakout force †† (§) kN 709.2 708.5 725.1 724.4 753.1 752.4 751.6 750.8
lb 159,562 159,416 163,147 162,980 169,437 169,282 169,113 168,940
Operating weight † (§) kg 133 637 134 603 134 620 135 586 133 374 134 340 134 174 135 140
lb 294,670 296,800 296,838 298,968 294,091 296,221 295,855 297,985