Manual

980K Wheel Loader Speci cations
Aggregate Package Operating Specifications
Bucket Type
Edge Type
Capacity – Rated (§)
m
3
yd
3
Capacity – Struck (§)
m
3
yd
3
Width (§)
mm
ft/in
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
Digging Depth (§)
mm
in
Overall Length
mm
ft/in
Overall Height with Bucket at Maximum Lift
mm
ft/in
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
Static Tipping Load, Straight (ISO)*
kg
lb
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
Static Tipping Load, Articulated (ISO)*
kg
lb
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
Breakout Force** (§)
kN
lb
Operating Weight*
kg
lb
Material Handling – Pin On
Bolt-On Teeth and
Edges Segments Teeth
5.70 5.70 5.50
7.46 7.46 7.19
5.06 5.06 4.86
6.62 6.62 6.36
3447 3535 3535
11'3" 11'7" 11'7"
3105 2928 2928
10'2" 9'7" 9'7"
1519 1641 1641
4'11" 5'4" 5'4"
3149 3361 3361
10'4" 11'0" 11'0"
103 103 68
4" 4" 2.6"
9618 9859 9859
31'7" 32'5" 32'5"
6242 6242 6242
20'6" 20'6" 20'6"
15 911 16 137 16 137
52'3" 53'0" 53'0"
22 514 22 331 22 749
49,621 49,217 50,139
23 945 23 760 24 194
52,774 52,367 53,325
19 810 19 627 20 024
43,662 43,258 44,132
21 106 20 921 21 332
46,519 46,111 47,017
221 218 234
49,662 49,126 52,720
32 145 32 284 32 108
70,848 71,153 70,766
* Static tipping loads and operating weights shown are based on a machine configuration with Michelin 29.5R25 XLDD1 L4 Radial tires,
full fluids, operator, standard counterweight, standard transmission, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 29.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
20