Manual

Axles Cab Service Rell Capacities
Front Fixed
Rear Oscillating
± 13 degrees
Maximum Single- 548 mm 21.6 in
Wheel Rise and Fall
Tires
• Choose from a variety of tires to match
your application.
• Choices include:
29.5R25 VMT BS L3 Radial
29.5-25 SRG LD FS E3/L3 Bias
29.5R25 XHA2 MX L3 Radial
29.5R25 XLDD1 MX L4 Radial
29.5R25 VSNT BS L4 Radial
29.6-25 SDT LD FS L5 Bias
29.5R25 VSDL BS L5 Radial
29.5R25 XLDD2 MX L5 Radial
29.5R25 X MINE D2 MX L5 Radial
• NOTE: In certain applications (such as
load and carry), the loader’s productive
capabilities might exceed the tires’ tonnes-
km/h (ton-mph) capabilities. Caterpillar
recommends that you consult a tire supplier
to evaluate all conditions before selecting a
tire model. Other special tires are available
on request.
ROPS/FOPS Meets SAE and
ISOstandards
• Cat cab with a four post integrated Rollover
Protective Structure (ROPS) are standard
inNorth America and Europe.
• ROPS meets SAE J1040 APR88 and
ISO3471:1994 criteria.
• Falling Objects Protective Structure (FOPS)
meets SAE J231 JAN81 and ISO:1992
Level II criteria.
Sound
• The sound values indicated below are
forspecic operating conditions only.
Machine and operator sound levels will
vary at different engine and/or cooling fan
speeds. Hearing protection may be needed
when the machine is operated with a cabin
that is not properly maintained, or when
the doors and/or windows are open for
extended periods or in a noisy environment.
• The operator sound pressure level for a
standard machine con guration, measured
according to the procedures speci ed
in ISO 6396:2008, is 72 dB(A) with the
cooling fan speed set at maximum value.
• The machine sound power level for a
standard machine con guration, measured
according to the procedures speci ed in
ISO 6395:2008, is 112 dB(A) with the
cooling fan speed set at maximum value.
• The machine sound pressure level for
a standard machine con guration,
measured according to the procedures
specied in SAE J88:2006, is 78 dB(A).
The measurement was conducted under
the following conditions: distance of 15 m
(49.2 ft), moving forward in an intermediate
gear ratio, static hydraulic cycle (with no
payload) and with the cooling fan speed
setat maximum value.
• The operator sound pressure level for
a machine installed with a Low Sound
package, measured according to the
procedures specied in ISO 6396:2008,
is72dB(A) with the cooling fan speed
setatmaximum value.
• The machine sound power level for a
machine installed with a Low Sound
package, measured according to the
procedures specied in ISO 6396:2008,
is109 dB(A) with the cooling fan speed
setat maximum value.
Fuel Tank – 447 L 118.1 gal
Standard
Cooling System 63 L 16.6 gal
Crankcase 37 L 9.8 gal
Transmission 66 L 17.4 gal
Differentials and 84 L 22.2 gal
Final Drives – Front
Differentials and 84 L 22.2 gal
Final Drives – Rear
Hydraulic Tank 170 L 44.9 gal
15