Owner manual

23
972H Wheel Loader specifications
General Purpose Rock Heavy-Duty Waste
Quick Coupler Buckets Bucket Rock Bucket Bucket
Teeth and Bolt-On Teeth and Teeth and Bolt-On Change
Teeth Segments Edges Segments Segments Edges in Specs
Rated Bucket Capacity (§) m
3
3.95 4.15 4.15 4.00 4.00 6.50
yd
3
5.25 5.50 5.50 5.25 5.25 8.50
Struck Capacity (§) m
3
3.43 3.60 3.60 3.45 3.45 5.60
yd
3
4.49 4.71 4.71 4.52 4.52 7.28
Width (§) mm 3306 3306 3220 3270 3270 3355
ft/in 10'10" 10'10" 10'7" 10'9" 10'9" 11'0"
Dump Clearance at Full Lift mm 3068 3068 3219 3075 3075 3212 335.75
and 45º Discharge (§) ft/in 10'1" 10'1" 10'7" 10'1" 10'1" 10'6" 1'1"
Reach at Full Lift mm 1474 1474 1335 1603 1603 1138 23.16
and 45º Discharge (§) ft/in 4'10" 4'10" 4'5" 5'3" 5'3" 3'9" 1"
Reach with Lift Arm Horizontal mm 3163 3163 2958 3244 3244 2845 309
and Bucket Level (§) ft/in 10'5" 10'5" 9'8" 10'8" 10'8" 9'4" 1'0"
Digging Depth (§) mm 67 94 94 98 98 113 -4.54
in 2.64 3.70 3.70 3.86 3.86 4.45 -0.1"
Overall Length mm 9419 9419 9196 9488 9488 9096 334.79
ft/in 30'11" 30'11" 30'2" 31'2" 31'2" 29'10" 1'1"
Overall Height with Bucket mm 6035 6035 6035 6067 6394 6722 335.75
at Full Raise ft/in 19'10" 19'10" 19'10" 19'11" 21'0" 22'1" 1'1"
Loader Clearance Circle with mm 15 158 15 158 14 946 15 159 15 159 15 022 330.32
Bucket in Carry Position (§) ft/in 49'9" 49'9" 49'0" 49'9" 49'9" 49'3" 1'1"
Static Tipping Load Straight * kg 18 387 17 996 18 221 18 618 18 483 19 458 -1802
lb 40,543 39,681 40,177 41,053 40,755 42,905 -3,973
Static Tipping Load kg 16 256 15 883 16 107 16 415 16 281 17 153 -1643
Full 37º Turn lb 35,844 35,022 35,516 36,195 35,900 37,822 -3,623
Breakout Force ** (§) kN 229 214 216 214 213 236 -7
lb 51,525 48,150 48,600 48,150 47,925 53,100 -1,654
Operating Weight * (§) kg 25 412 25 603 25 436 25 901 26 075 26 051 74
lb 56,033 56,455 56,086 57,112 57,495 57,442 163
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.
* Static tipping loads and operating weights shown are based on standard machine configuration with 26.5R25 L-4 Firestone tires, full fuel tank, coolants,
lubricants, air conditioner, ride control, power train guard, metal roading fenders and operator.
** Measured 102 mm (4.0") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
High Lift