Owner manual

21
972H Wheel Loader specifications
General Purpose Buckets
Teeth and Bolt-On Teeth and Bolt-On
Bucket Teeth Segments Edges Teeth Segments Edges
Rated Bucket Capacity (§)m
3
4.30 4.50 4.50 4.40 4.60 4.60
yd
3
5.50 5.75 5.75 5.75 6.00 6.00
Struck Capacity (§)m
3
3.67 3.82 3.82 3.85 4.00 4.00
yd
3
4.80 5.00 5.00 5.04 5.23 5.23
Width (§) mm 3306 3306 3220 3306 3306 3220
ft/in 10'10" 10'10" 10'7" 10'10" 10'10" 10'7"
Dump Clearance at Full Lift mm 3115 3115 3268 3100 3100 3252
and 45º Discharge (§) ft/in 10'3" 10'3" 10'9" 10'2" 10'2" 10'8"
Reach at Full Lift mm 1413 1413 1274 1431 1431 1291
and 45º Discharge (§) ft/in 4'8" 4'8" 4'2" 4'8" 4'8" 4'3"
Reach with Lift Arm Horizontal mm 3087 3087 2882 3109 3109 2904
and Bucket Level (§) ft/in 10'2" 10'2" 9'5" 10'2" 10'2" 9'6"
Digging Depth (§) mm 58 88 88 67 97 97
in 2.28 3.46 3.46 2.64 3.82 3.82
Overall Length mm 9339 9339 9115 9368 9368 9144
ft/in 30'8" 30'8" 29'11" 30'9" 30'9" 30'0"
Overall Height with Bucket mm 6122 6122 6122 6015 6015 6015
at Full Raise ft/in 20'1" 20'1" 20'1" 19'9" 19'9" 19'9"
Loader Clearance Circle with mm 15 110 15 110 14 899 15 130 15 130 14 919
Bucket in Carry Position (§) ft/in 49'7" 49'7" 48'11" 49'8" 49'8" 48'11"
Static Tipping Load Straight * kg 18 965 18 569 18 781 19 258 18 854 19 067
lb 41,818 40,945 41,412 42,464 41,573 42,043
Static Tipping Load kg 16 774 16 396 16 608 17 076 16 691 16 903
Full 37º Turn lb 36,987 36,153 36,621 37,653 36,804 37,271
Breakout Force ** (§) kN 247 231 232 244 229 230
lb 55,575 51,975 52,200 54,900 51,525 51,750
Operating Weight * (§) kg 25 542 25 733 25 566 25 124 25 315 25 148
lb 56,320 56,741 56,373 55,398 55,820 55,451
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.
* Static tipping loads and operating weights shown are based on standard machine configuration with 26.5R25 L-4 Firestone tires, full fuel tank, coolants,
lubricants, air conditioner, ride control, power train guard, metal roading fenders and operator.
** Measured 102 mm (4.0") behind ti
p
of cuttin
g
ed
g
e with bucket hin
g
e
p
in as
p
ivot
p
oint in accordance with SAE J732C.