Owner manual

Operating Specifications
Bucket Type
Edge Type
Bolt-On
Edges
3.40
4.45
2.90
3.79
3252
10'8"
3124
10'2"
1454
4'9"
2818
9'2"
68
2.7"
8656
28'5"
5845
19'3"
14 813
48'8"
17 057
37,594
18 293
40,318
15 004
33,068
16 213
35,734
186
41,828
25 011
55,125
Capacity – Rated (§)
m
3
yd
3
Capacity – Struck (§)
m
3
yd
3
Width (§)
mm
ft/in
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
Digging Depth (§)
mm
in
Overall Length
mm
ft/in
Overall Height with Bucket at Maximum Lift
mm
ft/in
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
Static Tipping Load, Straight (ISO)*
kg
lb
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
Static Tipping Load, Articulated (ISO)*
kg
lb
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
Breakout Force** (§)
kN
lb
Operating Weight*
kg
lb
Coal – Coal –
Rock – Pin On*** PinOn Fusion QC
High Lift
Teeth and Bolt-On Bolt-On Change
Segments Teeth Edges Edges inSpecs
3.40 3.20 7.10 7.10
4.45 4.19 9.29 9.29
2.90 2.70 6.20 6.20
3.79 3.53 8.11 8.11
3252 3252 3447 3447
10'8" 10'8" 11'3" 11'3"
3026 3026 2625 2597 558
9'11" 9'11" 8'7" 8'6" 1'9"
1576 1576 1583 1630
5'2" 5'2" 5'2" 5'4"
2974 2974 3252 3305 404
9'9" 9'9" 10'8" 10'10" 1'3"
68 25 140 126 –25
2.7" 0.9" 5.5" 4.9" –1"
8817 8817 9117 9160 788
29'0" 29'0" 29'11" 30'1" 2'7"
5845 5845 6071 6311 559
19'3" 19'3" 19'11" 20'9" 1'10"
14 901 14 901 15 214 15 232 481
48'11" 48'11" 49'11" 50'0" 1'7"
16 988 17 358 15 930 15 134 170
37,441 38,257 35,111 33,357 376
18 222 18 604 17 192 16 375 115
40,162 41,003 37,891 36,091 254
14 934 15 298 13 955 13 180 –11
32,914 33,717 30,757 29,048 –26
16 142 16 515 15 189 14 399 –54
35,578 36,400 33,478 31,736
–120
185 193 129 124 –14
41,704 43,564 29,095 27,969 –3,167
25 063 24 832 24 496 25 130 1726
55,239 54,730 53,989 55,387 3,803
* Static tipping loads and operating weights shown are based on a machine configuration with Michelin 26.5R25 XHA2 L3 Radial tires, full
fluids, operator, standard counterweight, cold start, roading fenders, Product Link, opendifferential axles (front/rear), power train guard,
secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 26.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE
Standard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
21