Owner manual

Operating Specifications
Bucket Type
Edge Type
Bolt-On
Edges
3.80
4.97
3.24
4.24
3220
10'6"
3038
9'11"
1362
4'5"
2783
9'1"
124
4.9"
8637
28'5"
5803
19'1"
14 743
48'5"
16 279
35,880
17 471
38,506
14 292
31,501
15 460
34,074
180
40,632
24 498
53,992
Capacity – Rated (§)
m
3
yd
3
Capacity – Struck (§)
m
3
yd
3
Width (§)
mm
ft/in
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
Digging Depth (§)
mm
in
Overall Length
mm
ft/in
Overall Height with Bucket at Maximum Lift
mm
ft/in
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
Static Tipping Load, Straight (ISO)*
kg
lb
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
Static Tipping Load, Articulated (ISO)*
kg
lb
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
Breakout Force** (§)
kN
lb
Operating Weight*
kg
lb
General Purpose – Fusion QC
Teeth and Bolt-On Teeth and
Segments Teeth Edges Segments Teeth
3.80 3.60 4.20 4.20 4.00
4.97 4.71 5.49 5.49 5.23
3.24 3.09 3.80 3.80 3.60
4.24 4.04 4.97 4.97 4.71
3271 3271 3220 3271 3271
10'8" 10'8" 10'6" 10'8" 10'8"
2886 2886 2960 2806 2806
9'5" 9'5" 9'8" 9'2" 9'2"
1501 1501 1433 1571 1571
4'11" 4'11" 4'8" 5'1" 5'1"
2988 2988 2893 3097 3097
9'9" 9'9" 9'5" 10'1" 10'1"
124 94 116 116 86
4.9" 3.7" 4.5" 4.5" 3.4"
8862 8862 8739 8965 8965
29'1" 29'1" 28'9" 29'5" 29'5"
5803 5803 5960 5960 5960
19'1" 19'1" 19'7" 19'7" 19'7"
14 917 14 917 14 794 14 970 14 970
49'0" 49'0" 48'7" 49'2" 49'2"
16 099 16 440 16 015 15 834 16 167
35,483 36,233 35,297 34,898 35,634
17 287 17 643 17 204 17 020 17 368
38,101 38,885 37,918 37,512 38,280
14 111 14 438 14 047 13 865 14 186
31,100 31,821 30,961 30,558 31,266
15 276 15 616 15 214 15 029 15 363
33,670 34,418 33,531 33,125 33,860
179 192 166 164 176
40,264 43,192 37,382 37,023 39,561
24 636 24 472 24 561 24 699 24 536
54,296 53,936 54,132 54,436 54,076
* Static tipping loads and operating weights shown are based on a machine configuration with Michelin 26.5R25 XHA2 L3 Radial tires, full
fluids, operator, standard counterweight, cold start, roading fenders, Product Link, opendifferential axles (front/rear), power train guard,
secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 26.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE
Standard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
19