Owner manual

Operating Specifications
Bucket Type
Edge Type
Bolt-On
Edges
3.80
4.97
3.24
4.24
3220
10'6"
3067
10'0"
1327
4'4"
2739
8'11"
124
4.9"
8592
28'3"
5788
19'0"
14 727
48'4"
16 852
37,142
18 071
39,829
14 843
32,715
16 034
35,339
187
42,151
24 081
53,073
Capacity – Rated (§)
m
3
yd
3
Capacity – Struck (§)
m
3
yd
3
Width (§)
mm
ft/in
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
Digging Depth (§)
mm
in
Overall Length
mm
ft/in
Overall Height with Bucket at Maximum Lift
mm
ft/in
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
Static Tipping Load, Straight (ISO)*
kg
lb
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
Static Tipping Load, Articulated (ISO)*
kg
lb
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
Breakout Force** (§)
kN
lb
Operating Weight*
kg
lb
General Purpose – Pin On
Teeth and Bolt-On Teeth and
Segments Teeth Edges Segments Teeth
3.80 3.60 4.00 4.00 3.80
4.97 4.71 5.23 5.23 4.97
3.24 3.09 3.50 3.50 3.34
4.24 4.04 4.58 4.58 4.37
3271 3271 3220 3271 3271
10'8" 10'8" 10'6" 10'8" 10'8"
2915 2915 3058 2905 2905
9'6" 9'6" 10'0" 9'6" 9'6"
1467 1467 1334 1473 1473
4'9" 4'9" 4'4" 4'10" 4'10"
2943 2943 2750 2955 2955
9'7" 9'7" 9'0" 9'8" 9'8"
124 94 124 124 94
4.9" 3.7" 4.9" 4.9" 3.7"
8817 8817 8604 8829 8829
29'0" 29'0" 28'3" 29'0" 29'0"
5788 5788 5902 5902 5902
19'0" 19'0" 19'5" 19'5" 19'5"
14 899 14 899 14 733 14 905 14 905
48'11" 48'11" 48'5" 48'11" 48'11"
16 671 16 870 16 833 16 652 16 885
36,743 37,182 37,101 36,701 37,215
17 886 18 074 18 062 17 877 18 113
39,422 39,835 39,809 39,401 39,922
14 661 14 851 14 821 14 638 14 856
32,312 32,733 32,666 32,262 32,743
15 849 16 028 16 021 15 836 16 056
34,932 35,326 35,311 34,903 35,388
185 199 185 183 197
41,781 44,901 41,695 41,326 44,390
24 218 24 055 24 133 24 270 24 107
53,377 53,017 53,188 53,492 53,132
* Static tipping loads and operating weights shown are based on a machine configuration with Michelin 26.5R25 XHA2 L3 Radial tires, full
fluids, operator, standard counterweight, cold start, roading fenders, Product Link, opendifferential axles (front/rear), power train guard,
secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 26.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE
Standard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
17