Owner manual

966K Wheel Loader Speci cations
Engine Operating Specications Hydraulic System
Engine Model Cat
®
C9.3 ACERT™
Max. Gross Power
(1,800 rpm) –
SAEJ1995
222 kW 296 hp
Max. Net Power
(1,800 rpm) –
ISO9249
199 kW 267 hp
Max. Net Power
(1,800 rpm) –
SAEJ1349
199 kW 267 hp
Max. Net Power
(1,800 rpm) –
EEC80/1269
199 kW 267 hp
Peak Gross Torque
(1,400 rpm) –
SAEJ1995
1364 N·m 1,006 ft-lb
Peak Net Torque 1274 N·m 940 ft-lb
Static Tipping Load
Full 37° Turn –
14 636 kg 32,259 lb
ISO14397-1*
Static Tipping Load
Full 37° Turn –
15 828 kg 34,886 lb
Rigid Tires**
Breakout Force 173 kN 38,984 lb
• For 4.2 m
3
(5.5 yd
3
) general purpose
buckets with BOCE.
* Full compliance to ISO (2007) 14397-1
Sections 1 thru 6, which requires 2%
verication between calculations and
testing.
** Compliance to ISO (2007) 14397-1
Sections 1 thru 5.
Transmission
Steering System Piston
Pump Type
Implement System– 340 L/min 90 gal/min
Maximum Pump
Output (2,275 rpm)
Implement System – 31 000 kPa 4,496 psi
Maximum Operating
Pressure
Implement System– 300 L/min 79.3 gal/
Optional 3rd Function min
Maximum Flow
Implement System– 20 700 kPa 3,000 psi
Optional 3rd Function
Maximum Pressure
Hydraulic Cycle 5.9 Seconds
Time– Raise from
Carry Position
(1,400 rpm) –
SAEJ1349
Bore 115 mm 4.5 in
Stroke 149 mm 5.9 in
Displacement 9.3 L 568 in
3
• Caterpillar engine with ACERT Technology–
meets Tier 4 Interim/Stage IIIB emission
standards.
Weights
Operating Weight 24 189 kg 53,311 lb
• For 4.2 m
3
(5.5 yd
3
) general purpose buckets
with BOCE.
Forward 1 6.7 km/h 4.2 mph
Forward 2 12.6 km/h 7.8 mph
Forward 3 22.4 km/h 13.9 mph
Forward 4 37.4 km/h 23.2 mph
Reverse 1 7.8 km/h 4.9 mph
Reverse 2 13.7 km/h 8.5 mph
Reverse 3 23.5 km/h 14.6 mph
Reverse 4 38.5 km/h 23.9 mph
• Maximum travel speed in standard vehicle
with empty bucket and standard L3 tires
with 826 mm (33 in) roll radius.
Hydraulic Cycle
Time – Dump, at
Maximum Raise
1.5 Seconds
Hydraulic Cycle
Time– Lower,
Empty, Float Down
2.4 Seconds
Hydraulic Cycle
Time– Total 9.8 Seconds
• Cycle time with rated payload.
Brakes
Brakes Meet OSHA,
SAEJ1473 OCT90
and ISO 3450-1985
Buckets
required standards
Bucket Capacities 2.50 m
3
-
9.20 m
3
3.25 yd
3
-
12.00 yd
3
• Refer to bucket selection chart.
14