User guide

23
966H Wheel Loader specifications
Heavy Duty
Quick Coupler General Purpose Buckets Rock Buckets Rock Buckets
Teeth and Bolt-On Bolt-On Teeth and Teeth and
Bucket Teeth Segments Edges Edges Segments Segments
Rated Bucket Capacity (§)m
3
3.65 3.85 3.85 3.50 3.50 3.50
yd
3
4.75 5.00 5.00 5.00 5.00 5.00
Struck Capacity (§)m
3
3.16 3.31 3.31 2.99 2.99 2.99
yd
3
4.13 4.33 4.33 3.91 3.91 3.91
Width (§) mm 3145 3145 3059 3283 3270 3270
ft/in 10'4" 10'4" 10'0" 10'9" 10'9" 10'9"
Dump Clearance at Full Lift mm 2843 2843 2995 3114 2965 2965
and 45º Discharge (§) ft/in 9'4" 9'4" 9'10" 10'3" 9'9" 9'9"
Reach at Full Lift mm 1520 1520 1380 1423 1612 1612
and 45º Discharge (§) ft/in 5'0" 5'0" 4'6" 4'8" 5'3" 5'3"
Reach with Lift Arm Horizontal mm 3068 3068 2863 2799 3004 3004
and Bucket Level (§) ft/in 10'1" 10'1" 9'5" 9'2" 9'10" 9'10"
Digging Depth (§) mm 88 118 118 113 118 118
in 3.46 4.65 4.65 4.45 4.65 4.65
Overall Length mm 9214 9214 8988 8921 9169 9169
ft/in 30'3" 30'3" 29'6" 29'3" 30'1" 30'1"
Overall Height with Bucket mm 5762 5762 5762 5736 5736 6063
at Full Raise ft/in 18'11" 18'11" 18'11" 18'10" 18'10" 19'11"
Loader Clearance Circle with mm 14 853 14 853 14 645 14 814 14 935 14 935
Bucket in Carry Position (§) ft/in 48'9" 48'9" 48'1" 48'7" 49'0" 49'0"
Static Tipping Load Straight * kg 16 965 16 634 16 797 17 380 17 244 17 122
lb 37,408 36,678 37,037 38,323 38,023 37,754
Static Tipping Load kg 15 103 14 787 14 950 15 439 15 303 15 180
Full 37º Turn lb 33,302 32,605 32,965 34,043 33,743 33,472
Breakout Force ** (§) kN 179 168 169 178 180 179
lb 40,275 37,800 38,025 40,050 40,500 40,275
Operating Weight * (§) kg 23 516 23 668 23 528 23 867 23 969 24 129
lb 51,853 52,188 51,879 52,627 52,852 53,204
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.
* Static tipping loads and operating weights shown are based on standard machine configuration with 26.5R25 L-4 Firestone tires, roading fenders. powertrain
guard, full fuel tank, coolants, lubricants, air conditioner and operator.
** Measured 102 mm (4.0") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.