Instruction Manual

962K Wheel Loader Specifications
Operating Specifications
Bucket Type
Edge Type
Capacity – Rated (§)
m
3
yd
3
Capacity – Struck (§)
m
3
yd
3
Width (§)
mm
ft/in
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
Digging Depth (§)
mm
in
Overall Length
mm
ft/in
Overall Height with Bucket at Maximum Lift
mm
ft/in
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
Static Tipping Load, Straight (ISO)*
kg
lb
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
Static Tipping Load, Articulated (ISO)*
kg
lb
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
Breakout Force** (§)
kN
lb
Operating Weight*
kg
lb
Material Handling – Fusion QC
High Lift
Bolt-On Teeth and Bolt-On Teeth and Change
Edges Segments Teeth Edges Segments Teeth inSpecs
3.60 3.60 3.40 3.80 3.80 3.60
4.71 4.71 4.45 4.97 4.97 4.71
3.10 3.10 2.90 3.28 3.28 3.11
4.05 4.05 3.79 4.29 4.29 4.07
2927 2994 2994 2927 2994 2994
9'7" 9'9" 9'9" 9'7" 9'9" 9'9"
2904 2778 2778 2868 2742 2742 288
9'6" 9'1" 9'1" 9'4" 8'11" 8'11" 0'11"
1414 1516 1516 1450 1552 1552 101
4'7" 4'11" 4'11" 4'9" 5'1" 5'1" 0'4"
2974 3135 3135 3025 3186 3186 277
9'9" 10'3" 10'3" 9'11" 10'5" 10'5" 0'10"
88 88 58 88 88 58 5
3.5" 3.5" 2.3" 3.5" 3.5" 2.3" 0.2"
8621 8793 8793 8672 8844 8844 443
28'4" 28'11" 28'11" 28'6" 29'1" 29'1" 1'6"
5860 5860 5860 5913 5913 5913 289
19'3" 19'3" 19'3" 19'5" 19'5" 19'5" 1'0"
13 966 14 140 14 140 13 998 14 173 14 173 308
45'10" 46'5" 46'5" 46'0" 46'6" 46'6" 1'1"
12 779 12 639 12 962 12 674 12 533 12 856 –652
28,166 27,857 28,568 27,935 27,624 28,335 –1,437
13 504 13 363 13 696 13 401 13 259 13 592 –748
29,764 29,453 30,187 29,537 29,223 29,957 –1,649
10 905 10 765 11 070 10 805 10 665 10 970 –635
24,034 23,726 24,398 23,816 23,505 24,178 –1,400
11 652 11 511 11 826 11 554 11 412 11 728 –723
25,681 25,370 26,065 25,466 25,153 25,848 –1,594
151 149 162 145 144 156 –1
33,932 33,696 36,525 32,677 32,440 35,091 –286
20 955 21 063 20 906 21 009 21 117 20 960 550
46,184 46,422 46,076 46,303 46,541 46,195 1,211
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, product link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
30