Instruction Manual
962K Wheel Loader Specifications
Operating Specifications
Bucket Type
Edge Type
Bolt-On
Edges
Capacity – Rated (§)
m
3
yd
3
2.70
3.53
Capacity – Struck (§)
m
3
yd
3
2.30
3.01
Width (§)
mm
ft/in
2927
9'7"
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
3153
10'4"
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
1336
4'4"
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
2720
8'11"
Digging Depth (§)
mm
in
88
3.5"
Overall Length
mm
ft/in
8367
27'6"
Overall Height with Bucket at Maximum Lift
mm
ft/in
5641
18'7"
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
13 811
45'4"
Static Tipping Load, Straight (ISO)*
kg
lb
13 391
29,515
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
14 124
31,131
Static Tipping Load, Articulated (ISO)*
kg
lb
11 470
25,281
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
12 225
26,944
Breakout Force** (§)
kN
lb
185
41,637
Operating Weight*
kg
lb
20 726
45,680
General Purpose – Fusion QC
Teeth and
Bolt-On
Edges
2.90
3.79
2.55
3.34
2927
9'7"
3097
10'1"
1374
4'6"
2789
9'1"
88
3.5"
8436
27'9"
5714
18'9"
13 852
45'6"
13 270
29,247
14 006
30,870
11 355
25,027
12 112
26,696
174
39,256
20 789
45,818
Teeth and
Segments Teeth Segments Teeth
2.70 2.50 2.90 2.70
3.53 3.27 3.79 3.53
2.30 2.11 2.55 2.33
3.01 2.76 3.34 3.05
2994 2994 2994 2994
9'9" 9'9" 9'9" 9'9"
3037 3037 2980 2980
9'11" 9'11" 9'9" 9'9"
1449 1449 1485 1485
4'9" 4'9" 4'10" 4'10"
2881 2881 2950 2950
9'5" 9'5" 9'8" 9'8"
88 58 88 58
3.5" 2.3" 3.5" 2.3"
8539 8539 8608 8608
28'1" 28'1" 28'3" 28'3"
5641 5641 5714 5714
18'7" 18'7" 18'9" 18'9"
13 982 13 982 14 024 14 024
45'11" 45'11" 46'1" 46'1"
13 255 13 595 13 132 13 468
29,214 29,963 28,943 29,685
13 987 14 339 13 867 14 215
30,827 31,604 30,563 31,331
11 333 11 653 11 217 11 534
24,979 25,684 24,722 25,421
12 087 12 419 11 973 12 302
26,640 27,371 26,389 27,114
184 202 173 190
41,401 45,487 39,020 42,687
20 834 20 677 20 897 20 740
45,918 45,572 46,056 45,710
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, product link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
24