Instruction Manual

Operating Specifications
Bucket Type
Edge Type
Capacity – Rated (§)
m
3
yd
3
Capacity – Struck (§)
m
3
yd
3
Width (§)
mm
ft/in
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
Digging Depth (§)
mm
in
Overall Length
mm
ft/in
Overall Height with Bucket at Maximum Lift
mm
ft/in
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
Static Tipping Load, Straight (ISO)*
kg
lb
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
Static Tipping Load, Articulated (ISO)*
kg
lb
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
Breakout Force** (§)
kN
lb
Operating Weight*
kg
lb
Material Handling – Pin On
Bolt-On Teeth and
Bolt-On
Edges
3.80
4.97
3.28
4.29
2927
9'7"
2910
9'6"
1408
4'7"
2965
9'8"
88
3.5"
8612
28'4"
5879
19'4"
13 967
45'10"
13 226
29,150
13 962
30,774
11 329
24,970
12 088
26,642
151
34,128
20 566
45,327
Teeth and
Edges Segments Teeth Segments Teeth
3.60 3.60 3.40 3.80 3.60
4.71 4.71 4.45 4.97 4.71
3.15 3.15 2.95 3.28 3.11
4.12 4.12 3.86 4.29 4.07
2927 2994 2994 2994 2994
9'7" 9'9" 9'9" 9'9" 9'9"
2946 2821 2821 2785 2785
9'8" 9'3" 9'3" 9'1" 9'1"
1372 1474 1474 1510 1510
4'6" 4'10" 4'10" 4'11" 4'11"
2914 3075 3075 3126 3126
9'6" 10'1" 10'1" 10'3" 10'3"
88 88 58 88 58
3.5" 3.5" 2.3" 3.5" 2.3"
8561 8733 8733 8784 8784
28'2" 28'8" 28'8" 28'10" 28'10"
5831 5831 5831 5879 5879
19'2" 19'2" 19'2" 19'4" 19'4"
13 936 14 108 14 108 14 139 14 139
45'9" 46'4" 46'4" 46'5" 46'5"
13 334 13 194 13 470 13 084 13 357
29,389 29,079 29,689 28,838 29,440
14 069 13 927 14 210 13 820 14 098
31,009 30,697 31,320 30,459 31,074
11 432 11 291 11 551 11 188 11 443
25,196 24,887 25,458 24,659 25,222
12 188 12 047 12 311 11 945 12 206
26,864 26,552 27,135 26,327 26,902
157 156 170 150 163
35,483 35,247 38,308 33,891 36,751
20 512 20 620 20 463 20 674 20 517
45,208 45,446 45,100 45,565 45,219
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, product link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
23