Instruction Manual

962K Wheel Loader Specifications
Operating Specifications
Bucket Type
Edge Type
Capacity – Rated (§)
m
3
yd
3
Capacity – Struck (§)
m
3
yd
3
Width (§)
mm
ft/in
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
Digging Depth (§)
mm
in
Overall Length
mm
ft/in
Overall Height with Bucket at Maximum Lift
mm
ft/in
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
Static Tipping Load, Straight (ISO)*
kg
lb
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
Static Tipping Load, Articulated (ISO)*
kg
lb
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
Breakout Force** (§)
kN
lb
Operating Weight*
kg
lb
Material Handling – Pin On
Bolt-On Teeth and Bolt-On Teeth and
Edges Segments Teeth Edges Segments Teeth
3.30 3.30 3.10 3.40 3.40 3.20
4.32 4.32 4.05 4.45 4.45 4.19
2.78 2.78 2.61 2.92 2.92 2.74
3.64 3.64 3.41 3.82 3.82 3.58
2927 2994 2994 2927 2994 2994
9'7" 9'9" 9'9" 9'7" 9'9" 9'9"
3006 2881 2881 2978 2852 2852
9'10" 9'5" 9'5" 9'9" 9'4" 9'4"
1312 1414 1414 1340 1442 1442
4'3" 4'7" 4'7" 4'4" 4'8" 4'8"
2829 2990 2990 2869 3030 3030
9'3" 9'9" 9'9" 9'4" 9'11" 9'11"
88 88 58 88 88 58
3.5" 3.5" 2.3" 3.5" 3.5" 2.3"
8476 8648 8648 8516 8688 8688
27'10" 28'5" 28'5" 28'0" 28'7" 28'7"
5744 5744 5744 5783 5783 5783
18'11" 18'11" 18'11" 19'0" 19'0" 19'0"
13 885 14 055 14 055 13 909 14 080 14 080
45'7" 46'2" 46'2" 45'8" 46'3" 46'3"
13 511 13 372 13 656 13 427 13 288 13 568
29,778 29,472 30,099 29,594 29,287 29,905
14 243 14 103 14 393 14 161 14 020 14 307
31,392 31,083 31,723 31,211 30,901 31,533
11 599 11 460 11 726 11 520 11 380 11 643
25,564 25,258 25,845 25,390 25,082 25,662
12 352 12 212 12 484 12 275 12 134 12 402
27,225 26,916 27,515 27,054 26,744 27,336
168 167 183 163 162 177
37,957 37,721 41,173 36,755 36,519 39,778
20 428 20 536 20 379 20 468 20 576 20 419
45,023 45,261 44,915 45,112 45,350 45,004
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, product link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
22