Instruction Manual
Operating Specifications
Bucket Type
Edge Type
Capacity – Rated (§)
m
3
yd
3
Capacity – Struck (§)
m
3
yd
3
Width (§)
mm
ft/in
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
Digging Depth (§)
mm
in
Overall Length
mm
ft/in
Overall Height with Bucket at Maximum Lift
mm
ft/in
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
Static Tipping Load, Straight (ISO)*
kg
lb
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
Static Tipping Load, Articulated (ISO)*
kg
lb
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
Breakout Force** (§)
kN
lb
Operating Weight*
kg
lb
Material Handling – Pin On
Bolt-On Teeth and Bolt-On Teeth and
Edges Segments Teeth Edges Segments Teeth
2.90 2.90 2.70 3.10 3.10 2.90
3.79 3.79 3.53 4.05 4.05 3.79
2.52 2.52 2.31 2.61 2.61 2.44
3.30 3.30 3.02 3.41 3.41 3.19
2927 2994 2994 2927 2994 2994
9'7" 9'9" 9'9" 9'7" 9'9" 9'9"
3070 2944 2944 3038 2913 2913
10'0" 9'7" 9'7" 9'11" 9'6" 9'6"
1248 1350 1350 1280 1382 1382
4'1" 4'5" 4'5" 4'2" 4'6" 4'6"
2739 2900 2900 2784 2945 2945
8'11" 9'6" 9'6" 9'1" 9'7" 9'7"
88 88 58 88 88 58
3.5" 3.5" 2.3" 3.5" 3.5" 2.3"
8386 8558 8558 8431 8603 8603
27'7" 28'1" 28'1" 27'8" 28'3" 28'3"
5192 5192 5192 5700 5700 5700
17'1" 17'1" 17'1" 18'9" 18'9" 18'9"
13 831 14 001 14 001 13 858 14 028 14 028
45'5" 46'0" 46'0" 45'6" 46'1" 46'1"
13 706 13 569 13 862 13 608 13 469 13 757
30,209 29,906 30,553 29,992 29,687 30,321
14 435 14 296 14 596 14 338 14 199 14 493
31,815 31,510 32,171 31,602 31,295 31,942
11 783 11 646 11 921 11 690 11 552 11 822
25,971 25,668 26,275 25,766 25,461 26,055
12 534 12 395 12 676 12 442 12 303 12 578
27,624 27,319 27,939 27,423 27,116 27,723
182 181 198 175 174 190
40,945 40,709 44,671 39,398 39,162 42,855
20 330 20 438 20 281 20 380 20 488 20 331
44,807 45,045 44,699 44,918 45,156 44,810
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, product link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
21