Instruction Manual
962K Wheel Loader Specifications
Operating Specifications
Bucket Type
Edge Type
Capacity – Rated (§)
m
3
yd
3
Capacity – Struck (§)
m
3
yd
3
Width (§)
mm
ft/in
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
Digging Depth (§)
mm
in
Overall Length
mm
ft/in
Overall Height with Bucket at Maximum Lift
mm
ft/in
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
Static Tipping Load, Straight (ISO)*
kg
lb
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
Static Tipping Load, Articulated (ISO)*
kg
lb
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
Breakout Force** (§)
kN
lb
Operating Weight*
kg
lb
General Purpose – Pin On
Bolt-On Teeth and
Edges Segments Teeth
3.80 3.80 3.60
4.97 4.97 4.71
3.36 3.36 3.12
4.39 4.39 4.08
2927 2994 2994
9'7" 9'9" 9'9"
2975 2855 2855
9'9" 9'4" 9'4"
1457 1566 1566
4'9" 5'1" 5'1"
2940 3101 3101
9'7" 10'2" 10'2"
88 88 58
3.5" 3.5" 2.3"
8587 8759 8759
28'3" 28'9" 28'9"
5894 5894 5894
19'5" 19'5" 19'5"
13 952 14 124 14 124
45'10" 46'5" 46'5"
13 400 13 258 13 538
29,534 29,220 29,838
14 155 14 011 14 298
31,198 30,881 31,514
11 481 11 339 11 600
25,304 24,991 25,568
12 257 12 113 12 381
27,015 26,698 27,289
154 153 166
34,784 34,548 37,504
20 558 20 666 20 509
45,308 45,546 45,200
Material Handling – Pin On
Bolt-On Teeth and
Edges Segments Teeth
2.70 2.70 2.50
3.53 3.53 3.27
2.32 2.32 2.11
3.03 3.03 2.76
2927 2994 2994
9'7" 9'9" 9'9"
3112 2987 2987
10'2" 9'9" 9'9"
1206 1308 1308
3'11" 4'3" 4'3"
2679 2840 2840
8'9" 9'3" 9'3"
88 88 58
3.5" 3.5" 2.3"
8326 8498 8498
27'4" 27'11" 27'11"
5835 5835 5835
19'2" 19'2" 19'2"
13 796 13 965 13 965
45'4" 45'10" 45'10"
13 829 13 693 14 027
30,480 30,180 30,917
14 556 14 418 14 763
32,081 31,778 32,538
11 899 11 763 12 078
26,226 25,926 26,622
12 647 12 510 12 835
27,874 27,572 28,289
192 191 210
43,166 42,930 47,301
20 274 20 382 20 225
44,684 44,922 44,576
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, product link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
20