Instruction Manual

962K Wheel Loader Specifications
Operating Specifications
Bucket Type
Edge Type
Capacity – Rated (§)
m
3
yd
3
Capacity – Struck (§)
m
3
yd
3
Width (§)
mm
ft/in
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
Digging Depth (§)
mm
in
Overall Length
mm
ft/in
Overall Height with Bucket at Maximum Lift
mm
ft/in
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
Static Tipping Load, Straight (ISO)*
kg
lb
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
Static Tipping Load, Articulated (ISO)*
kg
lb
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
Breakout Force** (§)
kN
lb
Operating Weight*
kg
lb
General Purpose – Pin On
Bolt-On Teeth and Bolt-On Teeth and
Edges Segments Teeth Edges Segments Teeth
3.10 3.10 2.90 3.30 3.30 3.10
4.05 4.05 3.79 4.32 4.32 4.05
2.76 2.76 2.54 2.94 2.94 2.72
3.61 3.61 3.32 3.85 3.85 3.56
2927 2994 2994 2927 2994 2994
9'7" 9'9" 9'9" 9'7" 9'9" 9'9"
3093 2975 2975 3054 2936 2936
10'1" 9'9" 9'9" 10'0" 9'7" 9'7"
1363 1474 1474 1392 1502 1502
4'5" 4'10" 4'10" 4'6" 4'11" 4'11"
2786 2947 2947 2835 2996 2996
9'1" 9'8" 9'8" 9'3" 9'9" 9'9"
88 88 58 88 88 58
3.5" 3.5" 2.3" 3.5" 3.5" 2.3"
8433 8605 8605 8482 8654 8654
27'8" 28'3" 28'3" 27'10" 28'5" 28'5"
5742 5742 5742 5788 5788 5788
18'11" 18'11" 18'11" 19'0" 19'0" 19'0"
13 859 14 029 14 029 13 888 14 059 14 059
45'6" 46'1" 46'1" 45'7" 46'2" 46'2"
13 753 13 613 13 906 13 626 13 486 13 777
30,312 30,005 30,651 30,033 29,724 30,365
14 502 14 362 14 662 14 377 14 236 14 534
31,964 31,654 32,316 31,688 31,376 32,034
11 816 11 677 11 950 11 695 11 555 11 827
26,043 25,736 26,339 25,777 25,468 26,068
12 587 12 446 12 726 12 467 12 326 12 605
27,742 27,431 28,050 27,479 27,167 27,781
175 174 190 168 167 182
39,361 39,125 42,810 37,784 37,548 40,971
20 373 20 481 20 324 20 443 20 551 20 394
44,902 45,140 44,794 45,055 45,293 44,947
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, product link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
18