Owner manual

28
962H Wheel Loader specifications
2.90 2.90 3.10 3.10 5.20
3.75 3.75 4.00 4.00 6.75
2.45 2.44 2.72 2.71 4.62
3.20 3.19 3.56 3.54 6.04
2984 2969 2984 2969 3073
9'9" 9'9" 9'9" 9'9" 10'1"
3061 2902 2996 2835 2906
10'1" 9'6" 9'10" 9'4" 9'6"
1247 1375 1290 1416 1228
4'1" 4'6" 4'3" 4'8" 4'0"
2688 2889 2768 2969 2807
8'10" 9'6" 9'1" 9'9" 9'3"
92 62 92 62 92
3.62 2.44 3.62 2.44 3.62
8217 8448 8317 8548 8356
27'0" 27'9" 27'3" 28'1" 27'5"
5581 5581 5662 5662 6195
18'4" 18'4" 18'7" 18'7" 20'4"
7126 7191 7148 7214 7199
23'5" 23'7" 23'5" 23'8" 23'7"
13 263 13 401 12 813 12 965 13 147
29,245 29,549 28,253 28,588 28,989
11 514 11 647 11 074 11 222 11 330
25,388 25,682 24,418 24,745 24,983
152.0 160.0 141.0 148.0 136.0
34,200 36,000 31,725 33,300 30,600
19 596 19 513 19 952 19 869 20 269
43,209 43,026 43,994 43,811 44,693
Bolt-on
edges
Teeth
and
segments
Bolt-on
edges
Bottom
strap
teeth
Bolt-on
edges
* Static tipping loads and operating weights shown are based on
standard machine configuration with 23.5R25 tires, full fuel tank,
coolants, lubricants, air conditioner, ride control and operator.
** Measured 102 mm (4.0") behind tip of cutting edge with bucket
hinge pin as pivot point in accordance with SAE J732C.
(§) Specifications and ratings conform to all applicable standards
recommended by the Society of Automotive Engineers,
including SAE Standard J732C governing loader ratings.
Waste/
Coal
Buckets
Rock Buckets