Owner manual

24
962H Wheel Loader specifications
2.90 2.90 3.10 3.10 5.20
3.75 3.75 4.00 4.00 6.75
2.45 2.44 2.72 2.71 4.62
3.20 3.19 3.56 3.54 6.04
2984 2969 2984 2969 3073
9'9" 9'9" 9'9" 9'9" 10'1"
2871 2712 2806 2645 2716 498
9'5" 8'11" 9'2" 8'8" 8'11" 1'8"
1297 1425 1340 1466 1278 3
4'3" 4'8" 4'5" 4'10" 4'2" 0.1"
2588 2789 2668 2869 2707 366
8'6" 9'2" 8'9" 9'5" 8'11" 1'2"
92 62 92 62 92 –10
3.62 2.44 3.62 2.44 3.62 –0.4
8090 8322 8170 8402 8229 433
26'7" 27'4" 26'10" 27'7" 27'0" 1'5"
5391 5391 5471 5471 6005 498
17'8" 17'8" 17'11" 17'11" 19'8" 1'8"
7068 7130 7089 7152 7141 205
23'2" 23'5" 23'3" 23'6" 23'5" 0'8"
14 044 14 186 13 587 13 743 13 996 –3776
30,967 31,280 29,959 30,303 30,861 –8,326
12 216 12 353 11 769 11 921 12 092 –3376
26,936 27,238 25,951 26,286 26,663 –7,444
151.0 159.0 140.0 147.0 135.0 –6.70
33,975 35,775 31,500 33,075 30,375 –1,508
19 464 19 381 19 820 19 737 20 137 533
42,918 42,735 43,703 43,520 44,402 1,175
Bolt-on
edges
Teeth
and
segments
Bolt-on
edges
Bottom
strap
teeth
Bolt-on
edges
Change
in specs
* Static tipping loads and operating weights shown are based on
standard machine configuration with 23.5R25 tires, full fuel tank,
coolants, lubricants, air conditioner, ride control and operator.
** Measured 102 mm (4.0") behind tip of cutting edge with bucket
hinge pin as pivot point in accordance with SAE J732C.
(§) Specifications and ratings conform to all applicable standards
recommended by the Society of Automotive Engineers,
including SAE Standard J732C governing loader ratings.
Waste/
Coal
Buckets
High LiftRock Buckets