Manual
950K Wheel Loader Specifications
Operating Specifications
Bucket Type
Edge Type
Capacity – Rated (§)
m
3
yd
3
Capacity – Struck (§)
m
3
yd
3
Width (§)
mm
ft/in
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
Digging Depth (§)
mm
in
Overall Length
mm
ft/in
Overall Height with Bucket at Maximum Lift
mm
ft/in
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
Static Tipping Load, Straight (ISO)*
kg
lb
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
Static Tipping Load, Articulated (ISO)*
kg
lb
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
Breakout Force** (§)
kN
lb
Operating Weight*
kg
lb
Material Handling – Fusion QC
Bolt-On Teeth and Bolt-On Teeth and
Edges Segments Teeth Edges Segments Teeth
3.60 3.60 3.40 3.80 3.80 3.60
4.71 4.71 4.45 4.97 4.97 4.71
3.10 3.10 2.90 3.28 3.28 3.11
4.05 4.05 3.79 4.29 4.29 4.07
2927 2994 2994 2927 2994 2994
9'7" 9'9" 9'9" 9'7" 9'9" 9'9"
2687 2561 2561 2651 2525 2525
8'9" 8'4" 8'4" 8'8" 8'3" 8'3"
1480 1583 1583 1517 1619 1619
4'10" 5'2" 5'2" 4'11" 5'3" 5'3"
2876 3037 3037 2927 3088 3088
9'5" 9'11" 9'11" 9'7" 10'1" 10'1"
90 90 60 90 90 60
3.5" 3.5" 2.3" 3.5" 3.5" 2.3"
8350 8523 8523 8401 8574 8574
27'5" 28'0" 28'0" 27'7" 28'2" 28'2"
5643 5643 5643 5697 5697 5697
18'7" 18'7" 18'7" 18'9" 18'9" 18'9"
13 867 14 040 14 040 13 898 14 073 14 073
45'6" 46'1" 46'1" 45'8" 46'3" 46'3"
11 798 11 657 11 974 11 700 11 558 11 875
26,004 25,693 26,392 25,787 25,474 26,172
12 526 12 383 12 711 12 429 12 286 12 614
27,608 27,293 28,016 27,394 27,078 27,801
10 122 9980 10 282 10 028 9886 10 187
22,309 21,998 22,661 22,101 21,788 22,452
10 864 10 722 11 034 10 772 10 629 10 941
23,946 23,631 24,319 23,743 23,426 24,114
138 137 149 133 132 143
31,176 30,901 33,524 30,013 29,739 32,198
20 007 20 115 19 958 20 061 20 169 20 012
44,094 44,332 43,986 44,213 44,451 44,105
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
High Lift
Change
inSpecs
505
1'7"
35
0'1"
374
1'2"
4
0.1"
604
2'0"
506
1'8"
393
1'4"
–1279
–2,820
–1440
–3,174
–1190
–2,622
–1341
–2,955
–8
–1,812
602
1,326
30