Manual

Operating Specifications
Bucket Type
Edge Type
Capacity – Rated (§)
m
3
yd
3
Capacity – Struck (§)
m
3
yd
3
Width (§)
mm
ft/in
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
Digging Depth (§)
mm
in
Overall Length
mm
ft/in
Overall Height with Bucket at Maximum Lift
mm
ft/in
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
Static Tipping Load, Straight (ISO)*
kg
lb
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
Static Tipping Load, Articulated (ISO)*
kg
lb
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
Breakout Force** (§)
kN
lb
Operating Weight*
kg
lb
Material Handling – Fusion QC
Bolt-On Teeth and Bolt-On Teeth and
Edges Segments Teeth Edges Segments Teeth
3.30 3.30 3.10 3.40 3.40 3.20
4.32 4.32 4.05 4.45 4.45 4.19
2.78 2.78 2.61 2.92 2.92 2.74
3.64 3.64 3.41 3.82 3.82 3.58
2927 2994 2994 2927 2994 2994
9'7" 9'9" 9'9" 9'7" 9'9" 9'9"
2747 2622 2622 2719 2593 2593
9'0" 8'7" 8'7" 8'11" 8'6" 8'6"
1420 1523 1523 1449 1551 1551
4'7" 4'11" 4'11" 4'9" 5'1" 5'1"
2791 2952 2952 2831 2992 2992
9'1" 9'8" 9'8" 9'3" 9'9" 9'9"
90 90 60 90 90 60
3.5" 3.5" 2.3" 3.5" 3.5" 2.3"
8265 8438 8438 8305 8478 8478
27'2" 27'9" 27'9" 27'3" 27'10" 27'10"
5561 5561 5561 5600 5600 5600
18'3" 18'3" 18'3" 18'5" 18'5" 18'5"
13 815 13 987 13 987 13 839 14 012 14 012
45'4" 45'11" 45'11" 45'5" 46'0" 46'0"
11 952 11 812 12 132 11 881 11 740 12 057
26,342 26,034 26,739 26,186 25,876 26,574
12 676 12 535 12 866 12 607 12 465 12 792
27,938 27,627 28,357 27,786 27,474 28,194
10 267 10 127 10 431 10 199 10 059 10 360
22,629 22,321 22,990 22,480 22,171 22,833
11 006 10 865 11 180 10 941 10 799 11 110
24,259 23,948 24,641 24,114 23,802 24,487
148 146 159 143 142 154
33,277 32,999 35,937 32,256 31,979 34,761
19 929 20 037 19 880 19 967 20 075 19 918
43,922 44,160 43,814 44,006 44,244 43,898
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
29