Manual

950K Wheel Loader Specifications
Operating Specifications
Bucket Type
Edge Type
Capacity – Rated (§)
m
3
yd
3
Capacity – Struck (§)
m
3
yd
3
Width (§)
mm
ft/in
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
Digging Depth (§)
mm
in
Overall Length
mm
ft/in
Overall Height with Bucket at Maximum Lift
mm
ft/in
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
Static Tipping Load, Straight (ISO)*
kg
lb
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
Static Tipping Load, Articulated (ISO)*
kg
lb
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
Breakout Force** (§)
kN
lb
Operating Weight*
kg
lb
Material Handling – Fusion QC
Bolt-On Teeth and Bolt-On Teeth and
Edges Segments Teeth Edges Segments Teeth
2.90 2.90 2.70 3.10 3.10 2.90
3.79 3.79 3.53 4.05 4.05 3.79
2.40 2.40 2.20 2.61 2.61 2.44
3.14 3.14 2.88 3.41 3.41 3.19
2927 2994 2994 2927 2994 2994
9'7" 9'9" 9'9" 9'7" 9'9" 9'9"
2811 2685 2685 2779 2653 2653
9'2" 8'9" 8'9" 9'1" 8'8" 8'8"
1357 1459 1459 1389 1491 1491
4'5" 4'9" 4'9" 4'6" 4'10" 4'10"
2701 2862 2862 2746 2907 2907
8'10" 9'4" 9'4" 9'0" 9'6" 9'6"
90 90 60 90 90 60
3.5" 3.5" 2.3" 3.5" 3.5" 2.3"
8175 8348 8348 8220 8393 8393
26'10" 27'5" 27'5" 27'0" 27'7" 27'7"
5480 5480 5480 5517 5517 5517
18'0" 18'0" 18'0" 18'2" 18'2" 18'2"
13 761 13 932 13 932 13 788 13 959 13 959
45'2" 45'9" 45'9" 45'3" 45'10" 45'10"
12 130 11 992 12 308 12 038 11 899 12 216
26,734 26,430 27,127 26,533 26,227 26,924
12 851 12 711 13 038 12 761 12 621 12 947
28,323 28,016 28,736 28,125 27,816 28,536
10 436 10 298 10 598 10 349 10 210 10 510
23,001 22,697 23,359 22,809 22,504 23,165
11 172 11 033 11 343 11 087 10 947 11 257
24,624 24,317 25,001 24,436 24,127 24,811
159 158 173 153 152 166
35,805 35,524 38,869 34,496 34,217 37,348
19 836 19 944 19 787 19 885 19 993 19 836
43,717 43,955 43,609 43,825 44,063 43,717
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
28