Manual

Operating Specifications
Bucket Type
Edge Type
Capacity – Rated (§)
m
3
yd
3
Capacity – Struck (§)
m
3
yd
3
Width (§)
mm
ft/in
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
Digging Depth (§)
mm
in
Overall Length
mm
ft/in
Overall Height with Bucket at Maximum Lift
mm
ft/in
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
Static Tipping Load, Straight (ISO)*
kg
lb
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
Static Tipping Load, Articulated (ISO)*
kg
lb
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
Breakout Force** (§)
kN
lb
Operating Weight*
kg
lb
General Purpose – Fusion QC
Bolt-On Teeth and Bolt-On Teeth and
Edges Segments Teeth Edges Segments Teeth
3.10 3.10 2.90 3.30 3.30 3.10
4.05 4.05 3.79 4.32 4.32 4.05
2.76 2.76 2.54 2.94 2.94 2.72
3.61 3.61 3.32 3.85 3.85 3.56
2927 2994 2994 2927 2994 2994
9'7" 9'9" 9'9" 9'7" 9'9" 9'9"
2837 2718 2718 2798 2679 2679
9'3" 8'11" 8'11" 9'2" 8'9" 8'9"
1475 1585 1585 1503 1613 1613
4'10" 5'2" 5'2" 4'11" 5'3" 5'3"
2748 2909 2909 2797 2958 2958
9'0" 9'6" 9'6" 9'2" 9'8" 9'8"
90 90 60 90 90 60
3.5" 3.5" 2.3" 3.5" 3.5" 2.3"
8222 8395 8395 8271 8444 8444
27'0" 27'7" 27'7" 27'2" 27'9" 27'9"
5558 5558 5558 5604 5604 5604
18'3" 18'3" 18'3" 18'5" 18'5" 18'5"
13 789 13 961 13 961 13 818 13 991 13 991
45'3" 45'10" 45'10" 45'5" 45'11" 45'11"
12 155 12 015 12 344 12 065 11 924 12 252
26,790 26,481 27,208 26,591 26,280 27,004
12 896 12 754 13 096 12 808 12 665 13 006
28,423 28,111 28,865 28,230 27,915 28,666
10 448 10 308 10 620 10 363 10 221 10 532
23,029 22,720 23,407 22,840 22,529 23,214
11 204 11 062 11 386 11 120 10 978 11 301
24,694 24,382 25,096 24,510 24,196 24,908
153 152 166 147 146 159
34,451 34,172 37,295 33,132 32,855 35,769
19 894 20 002 19 845 19 941 20 049 19 892
43,847 44,085 43,739 43,949 44,187 43,841
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
25