Manual

950K Wheel Loader Specifications
Operating Specifications
Bucket Type
Edge Type
Capacity – Rated (§)
m
3
yd
3
Capacity – Struck (§)
m
3
yd
3
Width (§)
mm
ft/in
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
Digging Depth (§)
mm
in
Overall Length
mm
ft/in
Overall Height with Bucket at Maximum Lift
mm
ft/in
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
Static Tipping Load, Straight (ISO)*
kg
lb
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
Static Tipping Load, Articulated (ISO)*
kg
lb
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
Breakout Force** (§)
kN
lb
Operating Weight*
kg
lb
General Purpose – Fusion QC
Bolt-On Teeth and Bolt-On Teeth and
Edges Segments Teeth Edges Segments Teeth
2.70 2.70 2.50 2.90 2.90 2.70
3.53 3.53 3.27 3.79 3.79 3.53
2.30 2.30 2.11 2.55 2.55 2.33
3.01 3.01 2.76 3.34 3.34 3.05
2927 2994 2994 2927 2994 2994
9'7" 9'9" 9'9" 9'7" 9'9" 9'9"
2936 2820 2820 2880 2763 2763
9'7" 9'3" 9'3" 9'5" 9'0" 9'0"
1402 1516 1516 1440 1552 1552
4'7" 4'11" 4'11" 4'8" 5'1" 5'1"
2622 2783 2783 2691 2852 2852
8'7" 9'1" 9'1" 8'9" 9'4" 9'4"
90 90 60 90 90 60
3.5" 3.5" 2.3" 3.5" 3.5" 2.3"
8096 8269 8269 8165 8338 8338
26'7" 27'2" 27'2" 26'10" 27'5" 27'5"
5424 5424 5424 5497 5497 5497
17'10" 17'10" 17'10" 18'1" 18'1" 18'1"
13 714 13 884 13 884 13 755 13 926 13 926
45'0" 45'7" 45'7" 45'2" 45'9" 45'9"
12 379 12 241 12 575 12 265 12 125 12 456
27,283 26,979 27,715 27,032 26,725 27,454
13 113 12 974 13 321 13 003 12 862 13 205
28,903 28,596 29,360 28,659 28,349 29,105
10 661 10 523 10 839 10 552 10 413 10 726
23,497 23,194 23,889 23,257 22,950 23,640
11 411 11 271 11 599 11 305 11 164 11 489
25,150 24,843 25,565 24,917 24,606 25,323
170 169 186 160 159 174
38,308 38,025 41,807 36,105 35,825 39,220
19 778 19 886 19 729 19 840 19 948 19 791
43,589 43,827 43,481 43,727 43,965 43,619
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
24