Manual

Operating Specifications
Bucket Type
Edge Type
Capacity – Rated (§)
m
3
yd
3
Capacity – Struck (§)
m
3
yd
3
Width (§)
mm
ft/in
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
Digging Depth (§)
mm
in
Overall Length
mm
ft/in
Overall Height with Bucket at Maximum Lift
mm
ft/in
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
Static Tipping Load, Straight (ISO)*
kg
lb
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
Static Tipping Load, Articulated (ISO)*
kg
lb
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
Breakout Force** (§)
kN
lb
Operating Weight*
kg
lb
Material Handling – Pin On
Bolt-On Teeth and Bolt-On Teeth and
Edges Segments Teeth Edges Segments Teeth
3.60 3.60 3.40 3.80 3.80 3.60
4.71 4.71 4.45 4.97 4.97 4.71
3.15 3.15 2.95 3.28 3.28 3.11
4.12 4.12 3.86 4.29 4.29 4.07
2927 2994 2994 2927 2994 2994
9'7" 9'9" 9'9" 9'7" 9'9" 9'9"
2729 2604 2604 2693 2568 2568
8'11" 8'6" 8'6" 8'10" 8'5" 8'5"
1438 1540 1540 1474 1576 1576
4'8" 5'0" 5'0" 4'10" 5'2" 5'2"
2816 2977 2977 2867 3028 3028
9'2" 9'9" 9'9" 9'4" 9'11" 9'11"
90 90 60 90 90 60
3.5" 3.5" 2.3" 3.5" 3.5" 2.3"
8290 8463 8463 8341 8514 8514
27'3" 27'10" 27'10" 27'5" 28'0" 28'0"
5614 5614 5614 5662 5662 5662
18'6" 18'6" 18'6" 18'7" 18'7" 18'7"
13 838 14 009 14 009 13 869 14 041 14 041
45'5" 46'0" 46'0" 45'6" 46'1" 46'1"
12 338 12 196 12 463 12 236 12 093 12 356
27,194 26,882 27,470 26,969 26,654 27,234
13 076 12 933 13 205 12 976 12 832 13 100
28,820 28,504 29,105 28,599 28,281 28,873
10 636 10 495 10 746 10 539 10 396 10 643
23,443 23,131 23,684 23,228 22,914 23,459
11 389 11 246 11 502 11 294 11 150 11 402
25,102 24,787 25,351 24,892 24,574 25,130
145 143 156 139 138 150
32,610 32,333 35,171 31,355 31,079 33,731
19 564 19 672 19 515 19 618 19 726 19 569
43,118 43,356 43,010 43,237 43,475 43,129
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
23