Manual
950K Wheel Loader Specifications
Operating Specifications
Bucket Type
Edge Type
Capacity – Rated (§)
m
3
yd
3
Capacity – Struck (§)
m
3
yd
3
Width (§)
mm
ft/in
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
Digging Depth (§)
mm
in
Overall Length
mm
ft/in
Overall Height with Bucket at Maximum Lift
mm
ft/in
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
Static Tipping Load, Straight (ISO)*
kg
lb
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
Static Tipping Load, Articulated (ISO)*
kg
lb
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
Breakout Force** (§)
kN
lb
Operating Weight*
kg
lb
Material Handling – Pin On
Bolt-On Teeth and
Bolt-On
Edges
3.40
4.45
2.92
3.82
2927
9'7"
2761
9'0"
1406
4'7"
2771
9'1"
90
3.5"
8245
27'1"
5566
18'4"
13 811
45'4"
12 426
27,387
13 162
29,009
10 719
23,626
11 470
25,282
150
33,788
19 520
43,021
Teeth and
Edges Segments Teeth Segments Teeth
3.30 3.30 3.10 3.40 3.20
4.32 4.32 4.05 4.45 4.19
2.78 2.78 2.61 2.92 2.74
3.64 3.64 3.41 3.82 3.58
2927 2994 2994 2994 2994
9'7" 9'9" 9'9" 9'9" 9'9"
2789 2664 2664 2636 2636
9'1" 8'8" 8'8" 8'7" 8'7"
1378 1480 1480 1508 1508
4'6" 4'10" 4'10" 4'11" 4'11"
2731 2892 2892 2932 2932
8'11" 9'5" 9'5" 9'7" 9'7"
90 90 60 90 60
3.5" 3.5" 2.3" 3.5" 2.3"
8205 8378 8378 8418 8418
27'0" 27'6" 27'6" 27'8" 27'8"
5527 5527 5527 5566 5566
18'2" 18'2" 18'2" 18'4" 18'4"
13 787 13 957 13 957 13 981 13 981
45'3" 45'10" 45'10" 45'11" 45'11"
12 504 12 364 12 638 12 285 12 556
27,560 27,251 27,855 27,076 27,673
13 239 13 097 13 377 13 019 13 296
29,178 28,866 29,484 28,695 29,305
10 794 10 654 10 912 10 579 10 833
23,791 23,482 24,050 23,316 23,877
11 543 11 402 11 665 11 328 11 588
25,442 25,130 25,711 24,968 25,541
155 154 168 149 162
34,901 34,621 37,819 33,510 36,529
19 480 19 588 19 431 19 628 19 471
42,933 43,171 42,825 43,259 42,913
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
22