Manual

Operating Specifications
Bucket Type
Edge Type
Capacity – Rated (§)
m
3
yd
3
Capacity – Struck (§)
m
3
yd
3
Width (§)
mm
ft/in
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
Digging Depth (§)
mm
in
Overall Length
mm
ft/in
Overall Height with Bucket at Maximum Lift
mm
ft/in
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
Static Tipping Load, Straight (ISO)*
kg
lb
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
Static Tipping Load, Articulated (ISO)*
kg
lb
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
Breakout Force** (§)
kN
lb
Operating Weight*
kg
lb
Material Handling – Pin On
Bolt-On Teeth and Bolt-On Teeth and
Edges Segments Teeth Edges Segments Teeth
2.90 2.90 2.70 3.10 3.10 2.90
3.79 3.79 3.53 4.05 4.05 3.79
2.52 2.52 2.31 2.61 2.61 2.44
3.30 3.30 3.02 3.41 3.41 3.19
2927 2994 2994 2927 2994 2994
9'7" 9'9" 9'9" 9'7" 9'9" 9'9"
2853 2728 2728 2821 2696 2696
9'4" 8'11" 8'11" 9'3" 8'10" 8'10"
1314 1416 1416 1346 1448 1448
4'3" 4'7" 4'7" 4'5" 4'9" 4'9"
2641 2802 2802 2686 2847 2847
8'8" 9'2" 9'2" 8'9" 9'4" 9'4"
90 90 60 90 90 60
3.5" 3.5" 2.3" 3.5" 3.5" 2.3"
8115 8288 8288 8160 8333 8333
26'8" 27'3" 27'3" 26'10" 27'5" 27'5"
4975 4975 4975 5483 5483 5483
16'4" 16'4" 16'4" 18'0" 18'0" 18'0"
13 734 13 903 13 903 13 761 13 930 13 930
45'1" 45'8" 45'8" 45'2" 45'9" 45'9"
12 688 12 550 12 833 12 595 12 456 12 734
27,965 27,660 28,285 27,760 27,453 28,066
13 419 13 279 13 569 13 328 13 187 13 471
29,575 29,267 29,906 29,375 29,065 29,691
10 969 10 831 11 098 10 881 10 741 11 003
24,177 23,871 24,460 23,982 23,675 24,251
11 715 11 575 11 848 11 628 11 487 11 755
25,820 25,512 26,113 25,629 25,319 25,908
167 166 182 161 160 175
37,667 37,384 41,052 36,235 35,954 39,374
19 382 19 490 19 333 19 432 19 540 19 383
42,717 42,955 42,609 42,827 43,065 42,719
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
21