Manual

950K Wheel Loader Specifications
Operating Specifications
Bucket Type
Edge Type
Capacity – Rated (§)
m
3
yd
3
Capacity – Struck (§)
m
3
yd
3
Width (§)
mm
ft/in
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
Digging Depth (§)
mm
in
Overall Length
mm
ft/in
Overall Height with Bucket at Maximum Lift
mm
ft/in
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
Static Tipping Load, Straight (ISO)*
kg
lb
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
Static Tipping Load, Articulated (ISO)*
kg
lb
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
Breakout Force** (§)
kN
lb
Operating Weight*
kg
lb
General Purpose – Pin On
Bolt-On Teeth and
Edges Segments Teeth
3.80 3.80 3.60
4.97 4.97 4.71
3.36 3.36 3.12
4.39 4.39 4.08
2927 2994 2994
9'7" 9'9" 9'9"
2758 2638 2638
9'0" 8'7" 8'7"
1524 1632 1632
5'0" 5'4" 5'4"
2842 3003 3003
9'3" 9'10" 9'10"
90 90 60
3.5" 3.5" 2.3"
8316 8489 8489
27'4" 27'11" 27'11"
5678 5678 5678
18'8" 18'8" 18'8"
13 854 14 025 14 025
45'6" 46'1" 46'1"
12 407 12 263 12 533
27,345 27,028 27,623
13 165 13 020 13 297
29,017 28,697 29,307
10 688 10 545 10 798
23,558
23,241 23,799
11 461 11 316 11 575
25,261 24,941 25,512
142 141 153
31,963 31,687 34,427
19 609 19 717 19 560
43,218 43,456 43,110
Material Handling – Pin On
Bolt-On Teeth and
Edges Segments Teeth
2.70 2.70 2.50
3.53 3.53 3.27
2.32 2.32 2.11
3.03 3.03 2.76
2927 2994 2994
9'7" 9'9" 9'9"
2896 2770 2770
9'6" 9'1" 9'1"
1272 1374 1374
4'2" 4'6" 4'6"
2581 2742 2742
8'5" 8'11" 8'11"
90 90 60
3.5" 3.5" 2.3"
8055 8228 8228
26'6" 27'0" 27'0"
5618 5618 5618
18'6" 18'6" 18'6"
13 700 13 868 13 868
45'0" 45'6" 45'6"
12 803 12 666 12 994
28,219 27,916 28,639
13 531 13 392 13 730
29,823 29,517 30,263
11 078 10 941 11 252
24,417 24,115 24,799
11 821 11 683 12 003
26,054 25,749 26,456
176 175 193
39,722 39,437 43,481
19 326 19 434 19 277
42,593 42,831 42,485
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
20