Manual

Operating Specifications
Bucket Type
Edge Type
Capacity – Rated (§)
m
3
yd
3
Capacity – Struck (§)
m
3
yd
3
Width (§)
mm
ft/in
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
Digging Depth (§)
mm
in
Overall Length
mm
ft/in
Overall Height with Bucket at Maximum Lift
mm
ft/in
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
Static Tipping Load, Straight (ISO)*
kg
lb
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
Static Tipping Load, Articulated (ISO)*
kg
lb
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
Breakout Force** (§)
kN
lb
Operating Weight*
kg
lb
General Purpose – Pin On
Bolt-On Teeth and
Bolt-On
Edges
3.60
4.71
3.18
4.16
2927
9'7"
2793
9'1"
1495
4'10"
2796
9'2"
90
3.5"
8270
27'2"
5630
18'6"
13 826
45'5"
12 506
27,564
13 263
29,232
10 783
23,767
11 554
25,467
147
33,133
19 554
43,097
Teeth and
Edges Segments Teeth Segments Teeth
3.40 3.40 3.20 3.60 3.40
4.45 4.45 4.19 4.71 4.45
3.04 3.04 2.81 3.18 2.94
3.98 3.98 3.68 4.16 3.85
2927 2994 2994 2994 2994
9'7" 9'9" 9'9" 9'9" 9'9"
2819 2700 2700 2673 2673
9'3" 8'10" 8'10" 8'9" 8'9"
1473 1582 1582 1604 1604
4'10" 5'2" 5'2" 5'3" 5'3"
2761 2922 2922 2957 2957
9'0" 9'7" 9'7" 9'8" 9'8"
90 90 60 90 60
3.5" 3.5" 2.3" 3.5" 2.3"
8235 8408 8408 8443 8443
27'1" 27'8" 27'8" 27'9" 27'9"
5597 5597 5597 5630 5630
18'5" 18'5" 18'5" 18'6" 18'6"
13 805 13 975 13 975 13 997 13 997
45'4" 45'11" 45'11" 46'0" 46'0"
12 577 12 434 12 712 12 363 12 638
27,719 27,406 28,019 27,249 27,854
13 332 13 188 13 473 13 118 13 400
29,384 29,067 29,696 28,914 29,534
10 850 10 708 10 969 10 640 10 898
23,915 23,601 24,176 23,452 24,020
11 620 11 476 11 743 11 410 11 674
25,611 25,294 25,883 25,148 25,729
151 150 164 146 159
34,071 33,792 36,855 32,855 35,772
19 518 19 626 19 469 19 662 19 505
43,017 43,255 42,909 43,335 42,989
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
19