Manual

Operating Specifications
Bucket Type
Edge Type
Capacity – Rated (§)
m
3
yd
3
Capacity – Struck (§)
m
3
yd
3
Width (§)
mm
ft/in
Dump Clearance at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Maximum Lift and 45° Discharge (§)
mm
ft/in
Reach at Level Lift Arm and Bucket Level (§)
mm
ft/in
Digging Depth (§)
mm
in
Overall Length
mm
ft/in
Overall Height with Bucket at Maximum Lift
mm
ft/in
Loader Clearance Circle with Bucket at Carry Position (§)
mm
ft/in
Static Tipping Load, Straight (ISO)*
kg
lb
Static Tipping Load, Straight (Rigid Tire)*
kg
lb
Static Tipping Load, Articulated (ISO)*
kg
lb
Static Tipping Load, Articulated (Rigid Tire)*
kg
lb
Breakout Force** (§)
kN
lb
Operating Weight*
kg
lb
General Purpose – Pin On
Bolt-On Teeth and Bolt-On Teeth and
Edges Segments Teeth Edges Segments Teeth
2.70 2.70 2.50 2.90 2.90 2.70
3.53 3.53 3.27 3.79 3.79 3.53
2.30 2.30 2.11 2.55 2.55 2.33
3.01 3.01 2.76 3.34 3.34 3.05
2927 2994 2994 2927 2994 2994
9'7" 9'9" 9'9" 9'7" 9'9" 9'9"
2975 2859 2859 2919 2802 2802
9'9" 9'4" 9'4" 9'6" 9'2" 9'2"
1356 1469 1469 1395 1506 1506
4'5" 4'9" 4'9" 4'6" 4'11" 4'11"
2562 2723 2723 2631 2792 2792
8'4" 8'11" 8'11" 8'7" 9'1" 9'1"
90 90 60 90 90 60
3.5" 3.5" 2.3" 3.5" 3.5" 2.3"
8036 8209 8209 8105 8278 8278
26'5" 27'0" 27'0" 26'8" 27'2" 27'2"
5392 5392 5392 5464 5464 5464
17'9" 17'9" 17'9" 18'0" 18'0" 18'0"
13 689 13 856 13 856 13 729 13 897 13 897
44'11" 45'6" 45'6" 45'1" 45'8" 45'8"
12 974 12 836 13 135 12 833 12 694 12 985
28,596 28,291 28,949 28,285 27,977 28,619
13 719 13 580 13 887 13 582 13 441 13 740
30,238 29,930 30,608 29,935 29,624 30,284
11 230 11 092 11 372 11 094 10 955 11 228
24,752 24,447 25,064 24,453 24,145 24,747
11 990 11 850 12 138 11 857 11 716 11 997
26,427 26,119 26,754 26,134 25,823 26,442
180 178 197 169 167 184
40,442 40,157 44,336 37,997 37,715 41,441
19 303 19 411 19 254 19 388 19 496 19 339
42,544 42,782 42,436 42,730 42,968 42,622
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
17