Manual

950K Wheel Loader Specifications
Engine Buckets Hydraulic System
Engine Model Cat
®
C7.1 ACERT™ Bucket Capacities 2.50 to 3.25 to Steering System Piston
9.20 m
3
12.00 yd
3
Pump Type
Max Gross Power 173 kW 232 hp
(1,900 rpm) –
• Refer to bucket selection chart.
Implement System– 340 L/min 90 gal/min
SAEJ1995 Maximum Pump
Max Gross Power 175 kW 234 hp
Operating Specications
Output (2,340 rpm)
(1,900 rpm) – Implement System – 26 200 kPa 3,800 psi
Static tipping load 11 008 kg 24,261 lb
SAEJ1995 (metric) Maximum Operating
full 40° turn –
Pressure
Max Net Power 157 kW 211 hp
ISO14397-1*
(1,900 rpm) – Implement System– 280 L/min 74 gal/min
Static tipping load 11 774 kg 25,951 lb
ISO9249 Optional 3rd and
full 40° turn –
4th Function
Max Net Power 159 kW 213 hp
RigidTires**
MaximumFlow
(1,900 rpm) –
Breakout Force 161 kN 36,203 lb
ISO9249 (metric) Implement System– 20 700 kPa 3,000 psi
Max Net Power 157 kW 211 hp
• For 3.1 m
3
(4.0 yd
3
) general purpose
Optional 3rd and
(1,900 rpm) –
buckets with BOCE.
4thFunction
SAEJ1349
* Full compliance to ISO (2007) 14397-1
Maximum Pressure
Sections 1 thru 6, which requires 2%
Hydraulic Cycle 5.9 Seconds
Max Net Power 159 kW 213 hp
verication between calculations
Time – Raise from
(1,900 rpm) –
andtesting.
Carry Position
SAEJ1349 (metric)
** Compliance to ISO (2007) 14397-1
Hydraulic Cycle 1.8 Seconds
Max Net Power 157 kW 211 hp
Sections 1 thru 5.
Time – Dump, at
(1,900 rpm) –
Maximum Raise
EEC80/1269
Transmission
Hydraulic Cycle 2.5 Seconds
Max Net Power 159 kW 213 hp
(1,900 rpm) –
Forward 1 6.9 km/h 4.3 mph
Time – Lower,
Empty, Float Down
EEC80/1269
Forward 2 12.9 km/h 8.0 mph
(metric) Hydraulic Cycle 10 Seconds
Forward 3 22.7 km/h 14.1 mph
Time – Total
Peak Gross Torque 1054 N∙m 777 ft-lb
Forward 4 37.9 km/h 23.6 mph
(1,300 rpm) –
• Cycle time with rated payload.
Reverse 1 7.5 km/h 4.7 mph
SAEJ1995
Reverse 2 14.1 km/h 8.8 mph
Peak Net Torque 988 N∙m 729 ft-lb
Brakes
(1,400 rpm) –
Reverse 3 24.8 km/h 15.4 mph
Brakes Meet OSHA,
SAEJ1349
Reverse 4 39.8 km/h 24.7 mph
SAEJ1473 OCT90
Bore 105 mm 4.1 in
• Maximum travel speed in standard vehicle
and ISO 3450-1985
Stroke 135 mm 5.3 in
with empty bucket and standard L3 tires
required standards
with 787 mm (31 in) roll radius.
Displacement 7.01 L 427.8 in
3
• Cat engine with ACERT™ Technology –
meets Tier 4 Interim/Stage IIIB emissions
requirements.
Weights
Operating Weight 19 425 kg 42,811 lb
• For 3.1 m
3
(4.0 yd
3
) general purpose buckets
with BOCE.
14