Manual

Operating Specications
Operating Specifications with Pallet Forks
9
8
5
10
7
3
2
1 4
6
13
11
12
Pallet Fork – Fusion
924K 930K 938K
1
Fork tine length 1220 mm 4'0" 1220 mm 4'0" 1220 mm 4'0"
2
Load center 610 mm 2'0" 610 mm 2'0" 610 mm 2'0"
3
Length: overall 7875 mm 25'10" 7882 mm 25'10" 7942 mm 26'0"
4
Reach: ground 926 mm 3'0" 926 mm 3'0" 961 mm 3'1"
5
Dig depth 47 mm 1.9" 47 mm 1.9" 44 mm 1.7"
6
Reach: level arm 1569 mm 5'1" 1569 mm 5'1" 1617 mm 5'3"
7
Reach: full lift 767 mm 2'6" 767 mm 2'6" 814 mm 2'8"
8
Clearance: level arm 1792 mm 5'10" 1792 mm 5'10" 1830 mm 6'0"
9
Clearance: full lift 3693 mm 12'1" 3693 mm 12'1" 3758 mm 12'3"
10
Height: overall 4676 mm 15'4" 4676 mm 15'4" 4740 mm 15'6"
Tipping load – straight, ISO 14397-1* 6650 kg 14,657 lb 7586 kg 16,720 lb 8811 kg 19,420 lb
Tipping load – full turn, ISO 14397-1* 5729 kg 12,626 lb 6502 kg 14,330 lb 7530 kg 16,595 lb
Operating weight 12 577 kg 27,719 lb 13 494 kg 29,741 lb 15 432 kg 34,012 lb
Rated load % of full turn tip:
50% of tip: SAE J1197** 2864 kg 6,313 lb 3251 kg 7,165 lb 3765 kg 8,297 lb
60% of tip: rough terrain EN474-3** 3437 kg 7,575 lb 3901 kg 8,598 lb 4518 kg 9,957 lb
80% of tip: firm and level EN474-3** 4583 kg 10,100 lb 5202 kg 11,464 lb 6024 kg 13,276 lb
11
Minimum fork spacing 300 mm 11" 300 mm 11" 300 mm 11"
12
Carriage width 1566 mm 5'1" 1566 mm 5'1" 1566 mm 5'1"
13
Maximum fork spacing 1550 mm 5'1" 1550 mm 5'1" 1550 mm 5'1"
*Full compliance to ISO 14397-1 (2007) Sections 1 through 6, which requires 2% verification between calculation and testing.
**Full compliance to EN474-3 and SAE J1197.
Dimensions listed are for a machine configured with Fusion work tool, counterweights, additional guarding, 80 kg (176 lb) operator,
andMichelin 20.5 R25 (L-3) XHA2 tires.
27