Manual

938K Operating Specifications with Buckets
Light Material
High Lift
Pin On Fusion
Rated capacity
m
3
3.5 4.2 5.0 3.5 4.2 5.0 –
yd
3
4.6 5.5 6.5 4.6 5.5 6.5 –
Struck capacity
m
3
3.3 4.0 4.8 3.3 4.0 4.8 –
yd
3
4.3 5.2 6.3 4.3 5.2 6.3 –
Width: bucket
mm 2750 2750 2750 2750 2750 2750 –
ft/in 9'0" 9'0" 9'0" 9'0" 9'0" 9'0" –
Nominal material density, 100% fill factor
kg/m
3
1378 1114 934 1313 1062 890 –
lb/yd
3
2311 1,875 1,583 2202 1,787 1,508 –
Clearance: full lift, 45° dump
mm 2691 2571 2571 2654 2534 2534 +581
ft/in 8'9" 8'5" 8'5" 8'8" 8'3" 8'3" +1'10"
Reach: full lift, 45° dump
mm 1174 1294 1294 1210 1331 1331 +267
ft/in 3'10" 4'2" 4'2" 3'11" 4'4" 4'4" +11"
Reach: 2130 mm (7'0") clearance, 45° dump
mm 1608 1654 1654 1622 1666 1666 +666
ft/in 5'3" 5'5" 5'5" 5'3" 5'5" 5'5" +2'2"
Reach: level arm, level bucket
mm 2642 2812 2812 2694 2864 2864 +607
ft/in 8'8" 9'2" 9'2" 8'10" 9'4" 9'4" +1'11"
Dig depth
mm 100 100 100 101 101 101 +35
in 3.9" 3.9" 3.9" 4" 4" 4" +1.4"
Length: overall
mm 7794 7964 7964 7846 8016 8016 +740
ft/in 25'6" 26'1" 26'1" 25'8" 26'3" 26'3" +2'5"
Height: overall
mm 5346 5507 5786 5376 5539 5820 +581
ft/in 17'6" 18'0" 18'11" 17'7" 18'2" 19'1" +1'10"
Turning radius, bucket at carry
mm 6174 6227 6227 6190 6244 6244 +357
ft/in 20'3" 20'5" 20'5" 20'3" 20'5" 20'5" +1'2"
Tipping load – straight, ISO 14397-1*
kg 11 332 11 018 11 001 10 847 10 549 10 526 –3003
lb 24,975 24,282 24,247 23,907 23,249 23,198 –6,618
Tipping load – straight, rigid tire**
kg 11 804 11 477 11 460 11 299 10 988 10 964 –3128
lb 26,016 25,294 25,257 24,903 24,217 24,164 –6,893
Tipping load – full turn, ISO 14397-1*
kg 9646 9359 9340 9194 8921 8895 –2625
lb 21,259 20,626 20,584 20,262 19,662 19,605 –5,785
Tipping load – full turn, rigid tire**
kg 10 262 9956 9936 9780 9491 9463 –2793
lb 22,616 21,943 21,898 21,556 20,917 20,856 –6,154
Breakout force
kg 11 750 10 331 10 281 11 263 9936 9888 –502
lb 25,897 22,768 22,659 24,822 21,899 21,792 –1,106
Operating weight
kg 15 730 15 869 15 937 16 131 16 270 16 335 +249
lb 34,668 34,975 35,124 35,551 35,859 36,002 +549
* Full compliance to ISO 14397-1 (2007) Sections 1 through 6, which requires 2% verification between calculation and testing.
** Compliance to ISO 14397-1 (2007) Sections 1 through 5.
Dimensions listed are for a 938K configured with bucket, bolt-on cutting edge, heavy counterweights, additional guarding, 80 kg (176 lb)
operator, and Michelin 20.5 R25 (L-3) XHA2 tires at a pressure of 4.48 bar (65 psi) in the front tires and 2.76 bar (40 psi) inthe rear tires.
25