924K, 930K, 938K Wheel Loaders 924K 930K 938K Cat® C6.6 ACERT™ Cat® C6.6 ACERT™ Cat® C6.6 ACERT™ ISO 14396 109 kW (146 hp) 119 kW (160 hp) 129 kW (173 hp) ISO 14396 (DIN) 109 kW (148 hp) 119 kW (162 hp) Engine Model* Maximum Gross Power: 129 kW (175 hp) Bucket Capacity 1.9-5.0 m (2.5-6.5 yd ) 2.1-5.0 m (2.7-6.5 yd ) 2.5-5.0 m3 (3.3-6.
Experience the Difference. Optimized Parallel Lift Z-bar Linkage Combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for superior performance and flexibility. Cab and Controls Large, spacious cab features excellent visibility to the front and rear, extremely low sound levels and low-effort ergonomic joystick controls so you can concentrate on your work. In cab adjustments are easy with intuitive controls and an easy to read optional display.
The Cat® 924K, 930K and 938K Wheel Loaders set a new standard for productivity, fuel efficiency and comfort. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day long. The new optimized Z-bar loader linkage delivers the performance and breakout forces of a traditional Z-bar linkage with the parallelism and load handling capability of a tool carrier. Experience the new industry benchmark.
Parallel Lift Loader Linkage Optimized Z-bar linkage delivers enhanced visibility with maximum productivity. Optimized Z-bar Linkage The new optimized patent-pending Z-bar linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. • Parallel lift and high tilt forces throughout the working range help you safely and confidently handle loads with precise control.
Industry Leading Operator Station Superior visibility, ergonomics and comfort. Best Seat on the Job Site Enjoy all day comfort in the spacious new K Series cab: • Extremely low sound levels. • Superior visibility to the work tool due to wide curved windshield, redesigned Z-bar linkage, lines routing and work tool design. • Automatic climate control. • A heated and ventilated seat option is available for added comfort in a wide range of climates.
Power Train Maximum machine power, reduced fuel consumption. Intelligent Power Management The Caterpillar exclusive Intelligent Power Management system actively monitors operator input and power availability to keep the machine working at peak efficiency. Engine The Cat® C6.6 ACERT™ engine provides cleaner, quieter operation while delivering superior performance and durability. The engine meets U.S. EPA Tier 4 Interim and EU Stage IIIB emission requirements.
Hydraulics Smooth, efficient operation helps you get the job done faster. Load-Sensing Hydraulic System K Series machines feature a new electro-hydraulic control system that is governed by the Intelligent Power Management system. The load-sensing, variable flow system senses work demand and adjusts flow and pressure to match. This allows full hydraulic forces at any engine speed. • Programmable in-cab kick-outs are easy to set on the go for tilt, lower and lift.
Work Tools Do more jobs with one machine. The Right Tool for the Job An extensive range of work tools and bucket styles are available to make your Cat Wheel Loader one of the most versatile machines on the job site. Performance Series Buckets Performance Series Buckets utilize a system-based approach to balance bucket shape with the machine’s linkage, weight, lift and tilt capacities.
Options Customize your machine to meet your needs. Configure the Machine the Way You Want It A variety of options are available on the Cat K Series Wheel Loaders to suit your specific application needs. See your Cat dealer for more information about the features below and additional options.
Serviceability Easy service to keep your machine working. All service points are accessible from ground level. Three large service doors can be opened and closed in any order to give full access to filters and service points. Extended service intervals reduce service time and maximize uptime. Additional service features include: • Diesel particulate filter that is matched for anticipated engine overhaul life. Passive regeneration system requires no operator interaction.
924K, 930K, 938K Wheel Loader Specifications Engine Engine Model Maximum Gross Power ISO 14396 ISO 14396 (DIN) Rated Net Power @ 1,800 rpm SAE J1349 ISO 9249 (1977)/EEC 80/1269 ISO 9249 (DIN) Maximum Gross Torque ISO 14396 Maximum Net Torque SAE J1349 ISO 9249 (1977)/EEC 80/1269 Displacement Bore Stroke 924K Cat® C6.6 ACERT™ 930K Cat® C6.6 ACERT™ 938K Cat® C6.
924K, 930K, 938K Wheel Loader Specifications Buckets • Performance Series Buckets utilize a long floor and open throat resulting in easy loading and good material retention. General Purpose Light Material 924K 1.9-2.5 m3 3.5-5.0 m3 2.5-3.3 yd3 4.6-6.5 yd3 930K 2.1-2.7 m3 3.5-5.0 m3 2.7-3.5 yd3 4.6-6.5 yd3 938K 2.5-3.2 m3 3.5-5.0 m3 3.3-4.2 yd3 4.6-6.
Loader Hydraulic System • Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. • 3rd function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. • 4th function flow is fixed.
924K, 930K, 938K Wheel Loader Specifications Transmission *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). 924K Forward Range 1* Range 2 Range 3 Range 4 Reverse Range 1* Range 2 Range 3 Range 4 930K 938K 1-13 km/h 13 km/h 27 km/h 40 km/h 0.6-8.0 mph 8 mph 17 mph 25 mph 1-13 km/h 13 km/h 27 km/h 40 km/h 0.6-8.
Tires 17.5 R25, radial (L-2) 17.5 R25, radial (L-3) 17.5 R25, radial (L-5) 20.5-25, 12PR (L-2) 20.5-25, 12PR (L-3) 20.5-25, 16PR (L-5) 20.5 R25, radial (L-2) 20.5 R25, radial (L-3)* 20.5 R25, radial (L-5) 550/65 R25, radial (L-3) 600/65 R25, radial (L-3) 650/65 R25, radial (L-3) Skidder/Agriculture Flexports Gen II 924K Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 930K 938K Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes *Standard tire.
924K, 930K, 938K Wheel Loader Specifications Dimensions with Bucket All dimensions are approximate. Dimensions will vary with bucket and tire choice. Refer to Operating Specifications with Buckets.
Dimensions with Bucket High Lift ** 1 Height: ground to cab ** 2 Height: ground to beacon ** 3 Height: ground axle center ** 4 Height: ground clearance * 5 Length: overall 6 Length: rear axle to bumper 7 Length: hitch to front axle 8 Length: wheel base * 9 Clearance: bucket at 45° ** 10 Clearance: load over height ** 11 Clearance: level bucket ** 12 Height: bucket pin ** 13 Height: overall * 14 Reach: bucket at 45° 15 Carry height: bucket pin ** 16 Dig depth 17 Width: bucket 18 Width: tread center 19 Turnin
Bucket Specifications 924K Operating Specifications with Buckets General Purpose Pin On Rated capacity Struck capacity Width: bucket Nominal material density, 100% fill factor Clearance: full lift, 45° dump Reach: full lift, 45° dump Reach: 2130 mm (7'0") clearance, 45° dump Reach: level arm, level bucket Dig depth Length: overall Height: overall Turning radius, bucket at carry Tipping load – straight, ISO 14397-1* Tipping load – straight, rigid tire** Tipping load – full turn, ISO 14397-1* Tipping load –
924K Operating Specifications with Buckets Light Material Pin On Rated capacity Struck capacity Width: bucket Nominal material density, 100% fill factor Clearance: full lift, 45° dump Reach: full lift, 45° dump Reach: 2130 mm (7'0") clearance, 45° dump Reach: level arm, level bucket Dig depth Length: overall Height: overall Turning radius, bucket at carry Tipping load – straight, ISO 14397-1* Tipping load – straight, rigid tire** Tipping load – full turn, ISO 14397-1* Tipping load – full turn, rigid tire**
Bucket Specifications 924K Bucket Selection Table m3 1.9 2.1 2.3 1.9 2.1 2.3 kg/m3 1375 1450 lb/yd3 2,317 2,443 yd3 2.5 2.7 114% 3.0 2.5 2.7 115% 109% 3.0 m3 3.5 4.2 5.0 3.5 4.2 5.0 650 kg/m3 600 lb/yd3 1,011 1,095 yd3 4.6 5.5 107% 6.5 4.6 5.5 110% 101% 6.
930K Operating Specifications with Buckets General Purpose Pin On Rated capacity Struck capacity Width: bucket Nominal material density, 100% fill factor Clearance: full lift, 45° dump Reach: full lift, 45° dump Reach: 2130 mm (7'0") clearance, 45° dump Reach: level arm, level bucket Dig depth Length: overall Height: overall Turning radius, bucket at carry Tipping load – straight, ISO 14397-1* Tipping load – straight, rigid tire** Tipping load – full turn, ISO 14397-1* Tipping load – full turn, rigid tire*
Bucket Specifications 930K Operating Specifications with Buckets Light Material Pin On Rated capacity Struck capacity Width: bucket Nominal material density, 100% fill factor Clearance: full lift, 45° dump Reach: full lift, 45° dump Reach: 2130 mm (7'0") clearance, 45° dump Reach: level arm, level bucket Dig depth Length: overall Height: overall Turning radius, bucket at carry Tipping load – straight, ISO 14397-1* Tipping load – straight, rigid tire** Tipping load – full turn, ISO 14397-1* Tipping load – f
930K Bucket Selection Table m3 2.1 2.3 2.5 2.1 2.3 2.5 kg/m3 1375 lb/yd3 2,317 yd3 2.7 3.0 3.3 2.7 3.0 3.3 m3 3.5 4.2 5.0 3.5 4.2 5.0 General Purpose Bucket Fill Factor Pin On Fusion Light Material Bucket Fill Factor Pin On Fusion 1450 2,443 1525 2,570 1600 2,696 1675 2,822 112% 107% 112% 102% 112% 107% 113% 102% 108% 97% 750 kg/m3 700 lb/yd3 1,180 1,264 yd3 4.6 5.5 6.5 113% 106% 4.6 5.5 6.
Bucket Specifications 938K Operating Specifications with Buckets General Purpose Fusion Pin On Rated capacity Struck capacity Width: bucket Nominal material density, 100% fill factor Clearance: full lift, 45° dump Reach: full lift, 45° dump Reach: 2130 mm (7'0") clearance, 45° dump Reach: level arm, level bucket Dig depth Length: overall Height: overall Turning radius, bucket at carry Tipping load – straight, ISO 14397-1* Tipping load – straight, rigid tire** Tipping load – full turn, ISO 14397-1* Tipping
938K Operating Specifications with Buckets Light Material Pin On Rated capacity Struck capacity Width: bucket Nominal material density, 100% fill factor Clearance: full lift, 45° dump Reach: full lift, 45° dump Reach: 2130 mm (7'0") clearance, 45° dump Reach: level arm, level bucket Dig depth Length: overall Height: overall Turning radius, bucket at carry Tipping load – straight, ISO 14397-1* Tipping load – straight, rigid tire** Tipping load – full turn, ISO 14397-1* Tipping load – full turn, rigid tire**
Bucket Specifications 938K Bucket Selection Table m3 2.5 2.7 2.9 2.5 2.7 2.9 kg/m3 1375 lb/yd3 2,317 yd3 3.3 3.5 3.8 3.3 3.5 3.8 m3 3.5 4.2 5.0 3.5 4.2 5.0 850 kg/m3 800 lb/yd3 1,348 1,432 yd3 4.6 5.5 110% 6.5 4.6 5.5 6.
Operating Specifications Operating Specifications with Pallet Forks 7 12 2 6 10 9 1 4 11 8 5 13 3 Pallet Fork – Fusion 1 Fork tine length 2 Load center 3 Length: overall 4 Reach: ground 5 Dig depth 6 Reach: level arm 7 Reach: full lift 8 Clearance: level arm 9 Clearance: full lift 10 Height: overall Tipping load – straight, ISO 14397-1* Tipping load – full turn, ISO 14397-1* Operating weight Rated load % of full turn tip: 50% of tip: SAE J1197** 60% of tip: rough terrain EN474-3** 80% of tip: fir
Operating Specifications Operating Specifications with Construction Forks 7 12 2 6 10 9 1 4 11 8 13 5 3 Construction Fork – Fusion 1 Fork tine length 2 Load center 3 Length: overall 4 Reach: ground 5 Dig depth 6 Reach: level arm 7 Reach: full lift 8 Clearance: level arm 9 Clearance: full lift 10 Height: overall Tipping load – straight, ISO 14397-1* Tipping load – full turn, ISO 14397-1* Operating weight Rated load % of full turn tip: 50% of tip: SAE J1197** 60% of tip: rough terrain EN474-3** 80
Operating Specifications with Material Handling Arm 4 3 2 1 8 7 6 5 9 10 13 11 12 22 19 18 20 21 14 15 16 17 Material Handling Arm – Fusion 1 924K 2113 mm 6'11" 930K 2113 mm 6'11" 938K 2144 mm 7'0" 12 924K 5327 mm 17'5" 930K 5327 mm 17'5" 938K 5376 mm 17'7" 2 2333 mm 7'7" 2333 mm 7'7" 2362 mm 7'8" 3 2919 mm 9'6" 2919 mm 9'6" 2943 mm 9'7" 13 1854 mm 6'0" 1854 mm 6'0" 1890 mm 6'2" 14 863 mm 2'9" 863 mm 2'9" 906 mm 2'11" 4 3505 mm 11'6" 3505 mm 11'6" 3525 mm
Operating Specifications Operating Specifications with High Dump Buckets Pin On Rated capacity Struck capacity Bucket width Nominal material density, 100% fill factor 1 Length: overall 2 Dump clearance: full lift, rolled out 3 Clearance: level bucket 4 Height: overall 5 Reach: full lift, rolled out 6 Dig depth Turning radius, bucket at carry 7 Maximum dump angle 8 Rack angle at carry Tipping load – straight, ISO 14397-1* Tipping load – straight, rigid tire** Tipping load – full turn, ISO 14397-1* Tipping lo
7 4 5 3 2 8 6 1 Bucket Selection Table for High Dump Buckets m3 3.0 3.5 4.1 3.0 3.5 4.1 4.1 kg/m3 lb/yd3 yd3 3.9 4.6 5.4 3.9 4.6 5.4 5.4 3.0 3.5 4.1 3.0 3.5 4.1 3.0 3.5 4.1 3.9 4.6 5.4 3.9 4.6 5.4 3.9 4.6 5.
Operating Specifications Operating Specifications with Multi-Purpose Bucket 12 8 10 7 9 6 11 5 31 32 4 3 Multi Purpose – Fusion Rated capacity Struck capacity 1 Length – dozer edge to bumper 2 Length: overall – closed clam 3 Length: overall – open clam 4 Dig depth 5 Clearance: full lift, 45° dump 6 Clearance: full lift – open clam 7 Height: overall 8 Reach: full lift – open clam 9 Reach: full lift, 45° dump 10 Maximum dump angle 924K 2.7 yd3 2.1 m3 2.0 m3 2.6 yd3 6744 mm 22'1" 930K 2.1 m3 2.
Supplemental Specifications Optional Equipment 924K Operating weight Change with options removed: Optional counterweight Guard, crankcase Guard, power train lower Guard, driveshaft Roading fenders Secondary steer Ride control Change with options added: Guard, front window Guard, rear waste gate Guard, power train side Cold start package Optional tool box Logger counterweight 930K Tipping load – full turn with 1.9 m3 (2.5 yd3) Fusion bucket Operating weight 938K Tipping load – full turn with 2.1 m3 (2.
924K, 930K, 938K Standard Equipment Standard equipment may vary. Consult your Cat dealer for details. POWER TRAIN • Axle seal guards • Auto idle shut down feature • Brake/decelerator pedal • Cat C6.
924K, 930K, 938K Optional Equipment Optional equipment may vary. Consult your Cat dealer for details.
924K, 930K, 938K Wheel Loaders For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com © 2012 Caterpillar Inc. All rights reserved Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options. CAT, CATERPILLAR, SAFETY.CAT.
