Owner's manual

11
Operating Specifications
Pin-on Buckets
With Bolt-On With Bolt-On With Bolt-On
Cutting Edge Teeth & Segments* Teeth*
Rated bucket capacity (§) m
3
2.0 2.3 2.0 2.3 1.9 2.2
yd
3
2.6 3.0 2.6 3.0 2.5 2.9
Struck capacity (§) m
3
1.7 1.9 1.7 1.9 1.6 1.8
yd
3
2.2 2.5 2.2 2.5 2.1 2.4
Bucket width mm 2549 2549 2549 2549 2549 2549
ft/in 8'4" 8'4" 8'4" 8'4" 8'4" 8'4"
10 Dump clearance at full lift and 45° discharge (§) mm 2879 2842 2766 2730 2766 2729
ft/in 9'5" 9'4" 9'1" 8'11" 9'1" 8'11"
14 Reach at full lift and 45° discharge (§) mm 927 964 1021 1058 1021 1058
ft/in 3'0" 3'2" 3'4" 3'6" 3'4" 3'6"
Reach at 45° discharge and 2130 mm (7'0") mm 1455 1474 1492 1509 1492 1509
clearance (§)
ft/in 4'9" 4'10" 4'11" 4'11" 4'11" 4'11"
Reach with lift arms horizontal mm 2253 2305 2399 2451 2399 2451
and bucket level
ft/in 7'5" 7'7" 7'10" 8'0" 7'10" 8'0"
20 Digging depth (§) mm 86 86 99 99 99 99
in 3.4" 3.4" 3.9" 3.9" 3.9" 3.9"
6 Overall length mm 7252 7304 7398 7450 7378 7430
ft/in 23'10" 24'0" 24'3" 24'5" 24'2" 24'5"
13 Overall height with bucket at full raise (§) mm 4971 5070 4971 5070 4971 5070
ft/in 16'4" 16'8" 16'4" 16'8" 16'4" 16'8"
24 Loader clearance radius with bucket mm 5781 5796 5845 5860 5845 5860
in carry position (§)
ft/in 19'0" 19'0" 19'2" 19'3" 19'2" 19'3"
Static tipping load straight (§) kg 9983 9911 9819 9746 9923 9851
lb 22,008 21,850 21,647 21,486 21,876 21,717
Static tipping load full 40° turn (§) kg 8654 8585 8490 8420 8594 8525
lb 19,079 18,928 18,718 18,564 18,948 18,795
Breakout force (§) kg 11 723 11 095 11 590 10 961 12 604 11 880
lb 25,844 24,460 25,552 24,165 27,787 26,191
Operating weight kg 12 564 12 618 12 669 12 753 12 614 12 668
lb 27,699 27,818 27,997 28,116 27,809 27,928
Specifications shown are for 928Hz with cab with A/C, optional counterweight, limited slip axles, heavy duty rear brakes, additional guarding,
sound supression, work tool, 80 kg (176 lb) operator and Michelin 20.5 R25 L3 XHA tires.
* Dimensions are measured to the tip of the bucket teeth to provide accurate clearance data. SAE standards specifies the cutting edge.
(
§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including
SAE-Standards J732 JUN92 and J742 FEB85 governing ratings.
Other Ground Engaging Tools available, consult your Cat dealer.