Owner's manual

928Hz Wheel Loader Specifications
10
Dimensions
All dimensions are approximate. Dimensions may vary with bucket. Refer to Operating Specifications.
1 Height to top of ROPS/FOPS 3269 mm (10 ft 9 in)
2 Height to top of exhaust stack 3189 mm (10 ft 6 in)
3 Height to top of hood 2197 mm (7 ft 2 in)
4 Height to center of axle 685 mm (2 ft 3 in)
5 Ground clearance 408 mm (1 ft 4 in)
6 Overall length 7252 mm (23 ft 10 in)
7 Length – rear axle to bumper 1920 mm (6 ft 4 in)
8 Center line of front axle to hitch 1450 mm (4 ft 9 in)
9 Wheel base length 2900 mm (9 ft 6 in)
10 Dump clearance at maximum lift and 45° dump 2879 mm (9 ft 5 in)
11 Bucket clearance at maximum lift and level 3752 mm (12 ft 4 in)
12 Bucket pin height at maximum lift 3872 mm (12 ft 8 in)
13 Overall height – bucket raised 4971 mm (16 ft 4 in)
14 Reach at maximum lift and 45° dump 927 mm (3 ft 0 in)
15 Rack back angle at maximum lift 60°
16 Dump angle at maximum lift 45°
17 Rack back angle at ground 44°
18 Rack back angle at carry 47.8°
19 Carry height 449 mm (1 ft 6 in)
20 Digging depth 86 mm (3 in)
Dimensions listed are for 928Hz with 2.0 m
3
(2.6 yd
3
) pin-on bucket with bolt-on cutting edge, cab with A/C, optional counterweights, limited slip
axles, heavy duty rear brakes, additional guarding, sound sppression, work tool, 80 kg (176 lb) operator and Michelin 20.5R25 L3 XHA tires.
20.5 R25 (L-3) Tires 17.5-25 12PR (L-2) Tires
21 Width at tread center 1950 mm (6 ft 5 in) 1950 mm (6 ft 5 in)
22 Overall width over tires 2570 mm (8 ft 5 in) 2407 mm (7 ft 11 in)
23 Minimum turning radius over tires 5275 mm (17 ft 4 in) 5186 mm (17 ft 0 in)
24 Minimum turning radius over bucket at ground level 5794 mm (19 ft 0 in) 5795 mm (19 ft 0 in)
25 Steering angle – left/right 40° 40°
Change in vertical dimension no change no change –65 mm (–2.6 in)
15
16
18
17
19
1
2
3
4
5
7
9
20
10
11
12
13
14
8
6
24
23
25
22
21